交叉泵浦布里渊放大系统增益特性分析-analysis of gain characteristics of cross-pumped brillouin amplification system.docxVIP

AbstractInertial Confinement Fusion provides a new way for human to cope with the energy crisis and has been concentrated on all around the world for its tremendous energy generation. In our country’s ICF system, hundred picoseconds level pulse amplification adopts the technique of stimulated Brillouin scattering. Collinear Brillouin amplification technique has been used for many years for relatively higher amplification efficiency, but for should be used to separate amplified single pulse from light road of the polarizer whose big one is difficult to be made and processed, it will not be better than non-collinear style which can provide this kind of problem a new approach which separates the single by transmission along its own way for some distance. But many parameters will be influenced by the degree, so investigation of the generation and mechanism of these influences is a really important thing.This paper begins with the acoustic equation, combining it with the knowledge of classical electrodynamics, and then obtains the formula of gain coefficient changing with the degree. The theory imitation shows that gain spectrum under different degree has its own peak value, and it increases with the incteasing of the degree, so this result is good for non-collinear Brillouin amplification. Then, with the same approach, equivalent interaction length is obtained which is used for converting non-collinear style to collinear style to solve the problem as energy transmission efficiency. Its theory imitation shows that equivalent interaction length under Brillouin frequency shift is decreasing with the increase of degree, but shows different trend of decreasing, under the condition of material selected with short phonon time it will not decrease obviously, so it is proved to be feasible to non-collinear Brillouin amplification.Under the condition of neglect of the interaction between different points of the transverse of the light beam, the method of establishment of three-di