- 9
- 0
- 约9.16千字
- 约 3页
- 2018-09-29 发布于河北
- 举报
变风量空调系统末端装置的性能分析
第 20 卷 第 1 期 山 东 建 筑 工 程 学 院 学 报 Vol. 20 No. 1
2005 年 3 月 JOURNAL OF SHANDONG UNIVERSITY OF ARCHITECTURE AND ENGINEERING Mar. 2005
( )
文章编号 :1003 - 5990 2005 01 - 0069 - 03
变风量空调系统末端装置的性能分析
1 2
李慧 ,段晨旭
( 1. 山东建筑工程学院 热能工程学院 ,山东 济南 250014 ;2. 山东建筑工程学院 信息与电气工程学院 ,山东 济南 250014)
摘要 : 目前 ,变风量空调系统的末端装置主要分为压力有关型和压力无关型 。采用 MATLAB 的 SIMULINK对变风量
空调系统的末端装置进行仿真 ,并进行理论分析 。与压力有关型比较 ,压力无关型仅仅多了一个流量检测装置 ,但
从仿真结果分析可以看出 ,压力无关型系统的控制品质得到大大提高 。
关键词 :变风量系统 ;末端控制 ;MATLAB
中图分类号 :TP23 文献标识码 :A
Performance analysis of VAV terminals
LI Hui1 , DUAN Chenxu2
( 1. School of Heat Energy Engineering ,Shandong University of Architecture and Engineering , Jinan 250014 , China ; 2. School of
)
Information and Electric Engineering ,Shandong University of Architecture and Engineering , Jinan 250014 , China
Abstract :There are pressuredependent and pressureindependent types of VAV terminals at present. Perfor
mances of the two types are simulated by SIMILINKof MATLAB in this paper. Compared with the pressurede
pendent terminal , the pressureindependent one requires a flow detective device. The simulating result indi
cates that the control quality of pressureindependent terminal system is significantly improved.
Key words : VAV system ;terminal control ;MATLAB
0 前言 动机 ,因此工程上通常采用变频调速器来调节电机
的转速 。变风量系统包括变风量空调机和多区应用
目前 ,在智能建筑中普遍采用中央空调系统 ,
原创力文档

文档评论(0)