旋转超声加工机床关键部件柔性化设计及试验.pdfVIP

旋转超声加工机床关键部件柔性化设计及实验 摘 要 在研讨超声波变幅杆设计原理和过程的基础上，分析了以往在其设计与分析 的过程中效率比较低的原因。研究了在CAD/CAE集成环境下变幅杆参数化设计和 一体化分析的具体方法。实现了其设计过程和分析过程的程序化、连续化。通过 实验和与同行业学者研究结果对比都表明：参数化设计法不仅能够满足技术要求， 免除超声变幅杆研制活动中手工计算、绘图之辛劳；而且使所需时间极大减少， 特别适合其几何尺寸既涉及数学物理原理，又互相影响的机械构件的设计。 关 键 词： 超声加工，变幅杆，模态分析，参数化设计 I 旋转超声加工机床关键部件柔性化设计及实验 Abstract In the process of studying and designing the principles of a ultrasonic scope-varied conveyer, we have analyzed the lower efficiency and reasons of the existed designs, and discussed the specific methods of the parameterized design and analysis of a ultrasonic scope-varied conveyer under integrated CAD/CAE circumstances. Hence, the design and analysis of it have been programmed and integrated. There is an evidence showing the fact that through experiments and ways of comparing with other results of the same field: not only can the method of parameterized design satisfy the technological requirements, exempt thoroughly from the manual graphic work of the researching and making of a ultrasonic scope-varied conveyer, but it can also shorten the needed maximum time, especially in harmony with geometrical sizes and shapes, when concerning all component designs of the interact and mixture of mathematical, physical, as well as mechanical principles. Key words: ultrasonic machining; scope-varied conveyer; mode analysis; parameterized analysis II 旋转超声加工机床关键部件柔性化设计及实验 目 录 第一章 前 言 1