[精品]AllenBrandleyPLC-500serialhandbook.pdf

PLC - 500 Series Handbook Introduction to PLC PLC Programming PLC Program Execution RS Logix 500 Software from Rockwell Automation Safety Precautions Exercises Allen-Bradley SLC 500 Series Handbook. Rev 2.0 (c) I-Sys Oct. 2006 Important Notice : The information presented in this publication is for the general education of the reader. Because neither the author nor the publisher have any control over the use of the information by the reader, both the author and the publisher disclaim any and all liability of any kind arising out of such use. The reader is expected to obtain a professional judgment in using any of the information presented in a particular application. The manufacturers instructions on use of any commercial product must be followed at all times, even if in conflict with the information in this publication. Intended Audience This manual is intended for the personnel, who must have knowledge of electrical systems (an electrical engineer, technician, or equivalent) with at least basic understanding of electrical circuitry and familiarity with relay logic. If you do not, notify your instructor and obtain the proper training before using PLC products. WARNING It is extremely important that a PLC and all PLC Units be used for the specified purpose and under the specified conditions, especially in applications that can directly or indirectly affect human life. You must consult with your Rockwell Automation representative before applying a PLC System to the above-mentioned applications. CAUTION Solid state equipment (I/O circuits, processor unit, etc de