Non-zonal Approaches for Grey Area灰色区域的方法.pdfVIP

Non-zonal Approaches for Grey Area Mitigation C. Mockett, M. Fuchs, F. Thiele, S. Wallin, S.H. Peng, S. Deck, J.C. Kok, H. van der Ven, A. Garbaruk, M. Shur, M. Strelets and A. Travin 1 Introduction The term non-zonal approach is applied in Go4Hybrid to refer to hybrid RANS-LES methods in which the model, not the user, defines the regions in which RANS and LES modes are active. Such methods are inherently more applicable to complex geometries than embedded approaches, however they are more susceptible to the grey area problem. C. Mockett () M. Fuchs F. Thiele CFD Software Entwicklungs- und Forschungsgesellschaft mbH (CFDB), Bismarckstr. 10-12, 10625 Berlin, Germany e-mail: charles.mockett@ S. Wallin S.H. Peng Unit of Aeronautical and Autonomous Systems, Swedish Defence Research Agency, FOI, 16490 Stockholm, Sweden S. Deck ONERA, The French Aerospace Lab, 92190 Meudon, France e-mail: sebastien.deck@onera.fr J.C. Kok H. van der Ven Netherlands Aerospace Centre NLR, Anthony Fokkerweg 2, 1059 Amsterdam, CM, Netherlands A. Garbaruk M. Shur M. Strelets A. Travin New Technologies and Services (NTS), 5A, Krasnogo Kursanta Street, 197198 St.-Petersburg, Russia A. Garbaruk M. Shur M. Strelets A. Travin St.-Petersburg Polytechnic University, 29, Polytechnicheskaya Street, 195258 St.-Petersburg, Russia © Springer International Publishing AG 2018 17 C. Mockett et al. (eds.), Go4Hybrid: Grey Area Mitigation for Hybrid RANS-LES Methods, Notes on Numerical Fluid Mechanics and Multidisciplinary Design 134, DOI 10.1007/978-3-319-52995-0_2 18 C. Mockett et al. This chapter describes the various approaches for grey area mitigation proposed by the relevant partners for non-zonal hybrid approaches. As far as possible, detailed descriptions are provided t