CCNA 17 简单配置路由器.pptVIP

LAN Connections Configuring a Cisco Router Overview of Router Modes Saving Configurations Configuring Router Identification Console-Line Commands Configuring an Interface Configuring an Interface Description Disabling or Enabling an Interface Configuring IP Addresses Unique addressing allows communication between end stations Path choice is based on destination address Router show interfaces Command Interpreting the Interface Status Verifying a Serial Interface Configuration Summary From the privileged EXEC mode, you can enter the global configuration mode, providing access to other configuration modes such as the interface configuration mode or line configuration mode. The main function of a router is to relay packets from one network device to another. To do this, the characteristics of the interfaces through which the packets are received and sent must be defined. Interface characteristics, such as the IP address and bandwidth, are configured using the interface configuration mode. Summary (Cont.) In a TCP/IP environment, end stations communicate seamlessly with servers or other end stations. This communication occurs because each node using the TCP/IP protocol suite has a unique 32-bit logical IP address. When the router interface configuration has been completed, it can be verified by using show commands ? 2007 Cisco Systems, Inc. All rights reserved. ICND1 v1.0—4-* ? 2007 Cisco Systems, Inc. All rights reserved. ICND1 v1.0—4-* Copies the current configuration to NVRAM RouterX# RouterX#copy running-config startup-config Destination filename [startup-config]? Building configuration… RourterX# RouterX(config)#line console 0 RouterX(config-line)#exec-timeout 20 30 RouterX(config)#line console 0 RouterX(config-line)#logging synchronous Modifies console session timeout Redisplays interrupted console input RouterX(config)#interface type number RouterX(config-if)# type includes serial, ethernet, token ring, fddi, hssi, loopback, dialer, null, async, atm, bri, tu