外文翻译基于STM32恒温箱温度控制系统.docVIP

Thermo Tank Temperature Control System Based On STM32 Biao QIU(贩贩er) , Shi-guang LI(贩贩, ), Zheng-zhong GAO(贩贩 Z), Xu ZHANG(贩贩 X), Yu RUI(贩贩 Y) (School of Information and Electrical Engineering, Shandong University of Science and Technology, Qingdao 266510, China) Abstract-this paper introduced a thermo tank temperature control system based on STM32, Firstly, the temperature acquisition is realized by the high-precision electrical bridge based on constant current source. Then the augmented PID algorithm realized by software is adopted Butterworth filter is used to convert the output PWM of STM32 to current signal which is used to control the semiconductor control rectifier to adjust the temperature. Calibration check and practical application both indicated that the system was reliable, high-precision, practicable and could meet reality needs. Key words-STM32; thermo tank; temperature acquisition; PID ManuscriptNumber: 1674-8042(2011)01-0064-03 Dio: 10.3969/j.issn.1674-8042.2011.01.16 1 introduction Thermo tank can be divided into low temperature thermo tank and high temperature thermo tank according to temperature range. Heating control thermo tank is one kind of high temperature thermo tank and has a wide range of applications in industrial, medical and scientific areas. As some special thermo tank control system require high precision in temperature acquisition and control, the system designed in this paper can measure temperatures from 16℃ to 80℃ and its precision is superior to ±0.05℃. As ARM is gradually occupying the microelectronics market for its powerful function and low cost, it is of important practical significance and value to design a temperature control system based on ARM with high precision, simple structure and low cost. 2 Basic control principles of thermo tank In this system, temperature acquisition of the inner thermo tank is realized by using platinum resistance as temperature sensor and bridge circuit based on constant current source. Then c