数控铣削编程和操作设计--毕业论文.docxVIP

摘 要 数控技术是一项高速发展的现代先进技术，数控加工程序是有多道复杂的程序组成的，本文从数控铣床的工作原理出发，并通过实际零件图2-1的数控铣床铣削加工。分析其加工工艺，包括零件图的工艺性分析、加工方法的选择、定位与加紧方式的选择、加工顺序的安排、走刀路线的确定、加工刀具的选择、切削用量的选择等。分析其加工的程序编制过程，详细记录每个步骤编写的程序。分析零件实操的操作过程，包括准备工作及刀具的夹紧、对刀、程序录入、加工成品、校对测量值等方面。通过介绍数控机床典型零件的铣削的加工过程，了解数控技术的应用与操作，促进数控技术的推广与发展。 关键词：数控技术；数控铣床；数控编程；数控操作 ABSTRACT Numerical control technology is a rapid development of modern advanced technology, the nc machining program is a multi-channel complex composition, in this paper, starting from the working principle of CNC milling machine, and through the actual parts CNC milling machine milling figure 2-1. Analysis of the processing technology, including the detail drawings manufacturability analysis, processing methods choice, the choice of the ways of positioning and intensify, the processing sequence arrangement, the determination of feed line, processing cutting tool selection, selection of cutting parameter, etc. Analysis of the machining process of programming, detailing each step program. Analysis of components in field operation process, including the preparation and tool clamping, the knife, program input, processing and finished product, calibration of measurement, etc. Through the introduction of typical parts of nc machine tools milling machining process, understand the application of numerical control technology and operation, promote the popularization and development of numerical control technology. Key words: CNC milling machine；CNC programming of numerical；control technology ；numerical control operation  目 录 TOC \o 1-3 \h \u  HYPERLINK \l _Toc6285 第一章 绪论  PAGEREF _Toc6285 1  HYPERLINK \l _Toc30845 1.1 数控铣床  PAGEREF _Toc30845 1  HYPERLINK \l _Toc8374 1.2 数控编程的内容和步骤  PAGEREF _Toc8374 1  HYPERLINK \l _Toc13281 第二章 加工零件图  PAGEREF _Toc13281 3  HYPERLINK \l _Toc27403 第三章 加工工艺分析与选择  PAGEREF _Toc27403 4  HYPERLINK \l _Toc30461 3.1 零件的工艺分析  PAGEREF _Toc30461 4  HYPERLINK \l _Toc29826 3.2夹具的选择  PAGEREF _Toc2982