图像识别（image recognition）.docVIP

图像识别（image recognition） Xqh665544ldm Two billion three hundred and ninety-five million three hundred and forty thousand two hundred and seventy-four Design of cylindrical parts detection system based on image recognition technology Similar to fingerprint identification. For example, is to use the camera on your face, and then in the computer to install software memory, when you next time, the camera will be judged according to the current user identity image and the stored image, can meet the requirements of the boot into the page, or to go into, as a code. However, the current image recognition technology is not perfect, and the recognition rate is not very high. Founder has a laptop with this technology. In automatic identification technology in equipment (English name Automatic Equipment Identification, referred to as AEI) is a new technology developed very rapidly in the world, the basic idea of this technology is through the use of short-range communication technology, people to realize all kinds of objects or devices in different states (mobile, stationary or harsh environment) automatic recognition and under the management of. At present, the most widely used automatic identification technology is microwave technology. In the field of automatic identification, microwave technology is more specific than Radio Frequency Identification (RFID). The working principle of RFID system is briefly described below. RFID reader by microwave emission antenna, RFID card reader writer microwave activation energy, received automatic back microwave signal containing vehicle information signal of the reader, the reader receives the RFID card by these signals, receiver decoder solved letter and vehicle related information, so as to establish the reader with RFID communication card. The vehicle information can be automatically processed by computer to realize automatic identification. Method for quality inspection of mechanical products, such as a part of how to detect unqualifi