螺杆型粉料分装机的结构及三维设计【带图纸】.doc

毕 业 设 计 论文题目：螺杆型粉料分装机的结构及三维设计 专 业：机电一体化工程 学生姓名： 指导教师： 2009年 月 日 螺杆型粉料分装机的结构及三维设计 摘 要 粉料分装机主要用于各种粉类物料的定量分装，尤其是在医用药粉的分装上应用广泛，装量小要求精度高。 本文介绍了各种粉料分装机的工作原理和发展前景，并对所设计的螺杆型粉料分装机的工作原理进行了介绍，对分装机进行了整体结构的设计与计算。 本分装机整体机构主要包括：分装头部件和主传动机构。分装头部件中有两个运动：螺杆旋转下料和搅拌器的转动，分别通过步进电机和一个永磁式低速电机来驱动，两电机通过控制面板来控制启动与停止。主传动系统通过主电机来驱动，经过一标准减速器，再经由一个间歇运动变速器产生间歇运动，最后经过一系列的齿轮传动将运动传递到输送带、分瓶拨轮机构和滚塞机构带动相应部件的运动。两个部分的运动之间是相互协调的，通过控制面版来控制。最后运用Solidworks软件对分装头部件进行了三维造型设计，并制作了分装头部件的爆炸视图和简单的动画模拟，同时对分装头的运动进行了简单的模拟。 关键词：粉料；分装机；螺杆；间歇运动机构  Structure and 3D Design of Screw rod Powder Material Racking Machine ABSTRACT The powder material racking machine is mainly used in many kinds of powder class material in the quota subpackage, in particular it is widely used in the medicinal powder subpackage,and the installed capacity is small ,required accuracy is high. This article introduces the working principle and the prospects for development several kinds of powder material racking machines. This article also introduces the working principle of the Scrow rod Powder Meterial Racking Machine,and describes the designing and calculation to the structure of the whole machine. This machine mainly includes two parts: Subpackage forehead and Master drive system. There is two movements in the Subpackage forehead: The screw rod revolving and the mixer rotation, which is separately drived by a step-by-steps motor and a DC motor. The master drive system actuates through the host electrical machinery, to pass through a standard gearbox, and then pass through a incomplete gearbox which is used to creat intermittent motion. At last through a series of gear-meshing the motion is deliveried to the moving parts including the conveyer belt, the Institutions for bottles and the Roller Cypriot institutions. The motion of the two parts is regulated by the Control panel. Finally made the 3D Design of the Subpackage forehead, and made the Explosion view by Solidworks software . KEY WORDS: Powder material; Racking machine; Screw