RF Contol and Low Noise Master Oscillator射频控制和低噪声主振荡器.pptVIP

Overview of SMTF RF Systems Brian Chase Overview ? Scope of RF Systems RF LLRF Collaboration LLRF Specifications for SMTF Progress So Far Status of progress Conclusions Scope of RF Systems A0 - Gun and cavity Meson (Oct, 05) - CC2 Meson (06) - Proton Driver A0 Upgrade (06) - Gun, CC1, CC2, 3.9 Acc, 3.9 Deflecting IB1 Horizontal Test Stand Multi- module support CW Program RF LLRF Collaboration ? Fermilab Accelerator, Technical, and Computing Divisions ? DESY ? Penn State ? SNS and Jlab advisory capacity for now ? We want to expand this engineering collaboration! LLRF Specifications for SMTF(Most Stringent Compilation) 1 to 4.5 ms pulse length or CW operation Variable rep rates up to 15 Hz 0.1 deg, 0.1% pulsed, 0.01 deg, 0.01% CW 325 1300 MHz warm/cold, and 3900 MHz cold only Multiple cavity per klystron operation Piezo tuner control Ferrite Vector Modulator control Progress So Far We have a DESY prototype FPGA LLRF controller that has been tested on the 9 cell cavity at A0. This system is now in the lab at the Magnet Test Facility where we have some libraries but not the operational source code. A stand alone LLRF system is planned for October EPICS control efforts are getting organized A design for a Low Noise master Oscillator is underway Meetings have been held to bring more people into the effort. An RF modeling and simulation group has been meeting for the Proton Driver. These efforts will spill over to the ILC. KLYSTRON INTERLOCKS Conclusions High Power RF and Modulators are on a clear path. Interlocks are in the design stage, will be ready for the October test LLRF is moving forward with a collaborative effort Simulation for Proton Driver are underway - could apply to ILC * SIMCON 2.1 setup at A0 – March 2005 Two modulators are being built One modulator end of this year, other early next year One with 4.2 ms flat top, other with 1.4 ms flattop Peak Output is 120 kV, 140 A Average Power is 310 kW Modulators 1.3 GHz 300 Kwatt Klystro