UV SterilizationUsing Microplasma Arrays Portable Water 紫外线杀菌，采用微等离子体阵列的便携式水.pptVIP

下载本文档

5
0
约2.81千字
约 31页
2018-06-19 发布于福建
举报
版权申诉

UV SterilizationUsing Microplasma Arrays Portable Water 紫外线杀菌，采用微等离子体阵列的便携式水.ppt

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

UV SterilizationUsing Microplasma Arrays Portable Water 紫外线杀菌，采用微等离子体阵列的便携式水

UV Sterilization Using Microplasma Arrays ECE 445 Final Presentation Amanda Chang and Leo Hua, Group 27 TA: Ran Hu April 28, 2006 Outline Introduction Objectives Design Fabrication Testing Device Performance Conclusions Introduction Microdischarge technology at the U of I Lighting and biomedical applications Cost-effectiveness and efficiency Objectives Apply thin-layered plasma generation devices towards ultraviolet generation for sterilization purposes Expand previous projects into the ultraviolet spectrum Increase the size of discharge arrays while maintaining stable operation Design Fabrication Original Design Preparing Electrodes Anodizing Process 0.3 M Oxalic acid 50 V, 15°C, 2 hours 10 μm-thick oxide Glass Paste (Proprietary Information Removed) Device Assembly (Proprietary Information Removed) Testing Testing Unpackaged Devices Verify effective fabrication process Evaluate qualitative behavior of device I-V Characteristics Packaged Devices I-V, Output Intensity, Efficiency Improvements to each successive device based on results Test Setup Device Performance Device #1 (Proprietary Information Removed) Device #2 (Proprietary Information Removed) Device #2: I-V Curves Emission Spectra Device #3 First packaged device Quartz slide provided better uniformity Device damaged during UV tests due to high fields around the gas inlet hole Device #4 Surrounded hole with epoxy for protection New method of applying epoxy to increase flatness Tape and epoxy first Quartz slide Device burnt at top edge during UV test Device #5 Hole separated from mesh Intensity measurements with Neon Electrode damaged during testing Device #5: Voltage vs. Intensity Device #6 (Proprietary Information Removed) Device #6: I-V Graph Device #6: Output Analysis Device #6: Efficiency Analysis Efficiency of Commercial Neon Lamp ~.01% Conclusions Successes Challenges Aluminum flatness Heat treatment New epoxy procedure Glass paste thickness UV Discharge Modified design and extra hole protection