Thermal Contact Conductance of MetalPolymer Joints金属及高分子接头的接触热导.pptVIP

Thermal Contact Conductance of Metal/Polymer Joints J.J. Fuller Mechanical Engineering Department Clemson University Clemson, SC 29634-0921 and E.E. Marotta Mechanical Engineering Department Clemson University Clemson, SC 29634-0921 TCC of Metal/Polymer Joints Objective Introduction Literature Review Problem Statement Summary and Discussion Conclusions Recommendations TCC of Metal/Polymer Joints- Objective Obtain a verifiable and usable analytical model for the prediction of the thermal joint resistance of a metal/polymer joint Investigation first limited to assuming nearly optically flat surfaces at a uniform interface pressure and to the class of thermoplastic and elastomeric polymers TCC of Metal/Polymer Joints- Introduction Important in chip-packaging design Polymers and organic materials are being employed to a greater extent Currently, a usable and verifiable model does not exist for predicting the thermal performance of metal/polymer joints TCC of Metal/Polymer Joints- Literature Quilliet et al. studied thermal characteristics of interface during injection molding Narh and Sridhar measured the joint thermal resistance of polystyrene as a function of thickness at constant temperature and pressure Parihar and Wright studied the thermal contact resistance of a (SS304)/silicone rubber/(SS 304) joint TCC of Metal/Polymer Joints- Literature Marotta and Fletcher measured the thermal conductivity and the thermal contact conductance of several widely available thermoplastic and thermosetting polymers They compared the experimentally measured data to the elastic model developed by Mikic and the plastic contact model developed by Cooper, Mikic and Yovanovich (CMY) TCC of Metal/Polymer Joints- Literature TCC of Metal/Polymer Joints- Problem Defining joint resistance Defining joint conductance TCC of Metal/Polymer Joints- Thickness A very important parameter is the thickness (t) of the polymer layer Makushkin derived an expression that