Dual String Gas Lift Well with Injection Pressure Valve ：注射压力阀双柱气举井.pptVIP

CASING HEAD PRESSURE FINE TUNING inDual String Gas Lift WellWith Injection Pressure Operated Valve By: Gatut Widianoko ( Weatherford ) Herry Subekti ( BP – Indonesia ) Wahyu Jatmiko ( BP – Indonesia ) Abstract Offshore North West Java Oil Field CHP Fine Tuning Candidates Wells( Gas Lift Optimization ) Suddenly production rate drop Suddenly the well dead Casing Head Pressure unstable Suddenly gas injection rate increase/decrease Inaccurate gas rate measure Robbing, and cause one (1) string dead or drop The well shutdown under maintenance The well shut-in while service status Gas lift Change out is being perform Suddenly Casing Head Pressure Increase Suddenly Casing Head Pressure decrease Suddenly Flowing Tubing Head Pressure increase Casing Head Pressure TuningSteps in Dual Gas Lift well Use graphical method to construct the well condition. Draw the static and flowing pressure gradient, etc. Select Kick Off and best Operating pressure available. Use 90% (max) off Kick Off as Operating pressure. Select best point of injection of both string ( close or same depth ) and operating port size (close or same size). Use same surface opening and closing pressure for both string valve. Perform gas lift well performance by software on each string to determine optimum condition . Perform CHP tuning by open the Gas Lift Header Choke and set at the kick off pressure selected. Adjusts the CHP slowly to reach the Best Surface Operating Pressure selected. Record the Rates. Select the best rate and keep best CHP. Why Do Casing Head Pressure tuning instead of  Gas Injection Rate Tuning ? WHAT IS BEST CHP Where is the existing CHP ? Is it too high ? Any un-loader valve reopen? Is the existing gas in too much ? Do We need to decrease it ? OR Is it too low ? Is the existing gas in too low ? Can the existing CHP pressure reach the operating valve ? Do we need to Increase it ? Any actions needs to be done ? Some Wells Sample