糖厂锅炉烟道气二氧化碳富集湿工艺及其设备设计研究预处理工段.docVIP

摘 要 糖厂锅炉烟道气CO2富集湿法工艺采用变压吸附法从糖厂锅炉烟道气中富集二氧化碳，并将其用于亚硫酸法制糖的澄清工艺，不仅减少了锅炉烟道气二氧化碳的排放，保护了生态环境，同时该工艺还能很好地解决了碳酸法制糖生产工艺的滤泥综合利用难、污染严重的问题，是对传统亚硫酸法制糖生产工艺一个重大改良。 设计说明书先阐述了二氧化碳的污染及其危害、排放和减排的情况、国内外甘蔗制糖工业的发展现状以及二氧化碳在制糖工业中的应用，比较论证了工业废气二氧化碳的回收利用的相关技术，得出了选用变压吸附法回收提纯二氧化碳的优势和发展前景。设计说明书对糖厂锅炉烟道气CO2富集湿法工艺主要进行了设备设计已经简单工艺流程分析，设备设计分对旋风除尘器、引风机等设备进行了设计选型，对换热器Ⅰ、稳压罐等设备进行了设计计算，通过化工设备强度计算专业软件（SW6-1998）校核了换热器的机械强度。最后用绘图软件AutoCAD2007绘制了旋风除尘器、换热器Ⅰ、稳压罐等设备的装配图和零部件图。 关键词：糖厂锅炉、烟道气、二氧化碳、预处理、设计 Sugar mill boiler flue gas CO2 enrichment wet process and equipment design research, pretreatment section Abstract Sugar mill boiler flue gas CO2 enrichment wet process using pressure swing adsorption enriched carbon dioxide from the flue gas boiler sugar mills and sugar for sulfite legal clarification process, not only reduces the boiler flue gas carbon dioxide emissions, protect the environment , while the process is also a good solution to the legal carbonated sugar production process filter mud utilization difficult, serious pollution problems , is the traditional method of sugar production process sulfite a major improvement . Design specification describes the first case of carbon dioxide pollution and its harmful emissions and emission reduction , domestic cane sugar industry development status and application of carbon dioxide in the sugar industry , compare demonstrated technologies for recycling industrial emissions of carbon dioxide , draw a selection pressure swing adsorption purification of carbon dioxide recycling advantages and development prospects. Design specification for sugar mill boiler flue gas CO2 enrichment wet process equipment has been designed mainly for the simple process analysis, design of equipment for the cyclone , fan and other equipment for the design and selection of heat exchangers Ⅰ, the surge tank and other equipment were designed , calculated by professional software chemical equipment intensity (SW6-1998) check the mechanical strength of the cooler. Finally, draw the graphics so