[工学]浅论kV供电系统的继电保护的设计方案.docVIP

本科毕业设计（论文）说明书 浅论10kV供电系统的继电保护的设计方案 摘 要 电力系统是由发电、变电、输电、配电和用电等五个环节组成的。在电力系统中，各种类型的、大量的电气设备通过电气线路紧密地联结在一起。由于其覆盖的地域极其辽阔、运行环境极其复杂以及各种人为因素的，电气故障的发生是不可避免的。由于电力系统的特殊性，上述五个环节应是环环相扣、时时平衡、缺一不可，又几乎是在同一时间内完成的。在电力系统中的任何一处发生事故，都有可能对电力系统的运行产生重大影响。 Abstract The power system is composed by the five aspects of power generation, substation, transmission, distribution and electricity. In the electrical power system, each kind of type, the massive electrical equipment through the electrical line joins closely in together. Because its cover region is extremely vast, the movement environment is extremely complex as well as each human factor, the electrical failure occurrence is inevitable. As a result of the electrical power system particularity, the above five links should be are linked together, balance at times, indispensably, also is nearly completes during the same period of time. Has the accident in electrical power system any, all has the possibility to have the significant influence to the electrical power system movement. This article 10kV power supply relay settings are as follows: phase fault protection using remote backup, two-stage current protection limit of instantaneous flow rate off protection, delay limits the flow rate circuit protection, over current protection; ground protection zero sequence current protection; accelerated three-phase 10 kV distribution lines using a heavy closing; 10kV line installed two-stage current protection, without a time limit of the current instantaneous over current protection and over-current protection with time limit; single line for connecting the power plant bus and 10kV installed with the direction or without the direction of current instantaneous over current protection and over current protection. For 10kV should not be running out of line, using longitudinal, transverse and poor protection. 10kV power supply system of the transformer low voltage s