Dynamic Stateless GRE Tunnel动态无国籍GRE隧道.pptVIP

Dynamic Stateless GRE Tunnel Li Xue Dayong Guo * Problem Statement GRE Tunnel GRE Tunnel Internet Provider DHCP Server NPE CPE In MSO or mobile hotspot scenario, the GRE tunnels between CPEs and the NPE are established to carry user data. Auto-configuration and dynamic management are required for large numbers of CPEs to discover the address of NPE and for NPE to configure GRE tunnel. DHCP(v6) option is extended to support NPE discovery * Dynamic GRE Tunnel NPE discovery on CPE To set up a GRE tunnel, a CPE send a DHCP Request to get the NPE address and other tunnel parameters such as GRE Key, Version, Protocol Type The DHCP GRE Discovery (GD) Option is defined in the following page. Establishment Phase For CPE, the GRE tunnel is set up after receiving DHCP GD Option. When NPE receives the packet with GRE encapsulation with a new client address, the NPE can records the assigned UEs address, which is the inner address of GRE encapsulated packet . Keepalive Phase If there is no data packet for a period of time, the NPE will tear down the tunnel and release the resource. * Procedure (NPE) (DHCP Server) (CPE) Encap/Decap User Packet in GRE Encap Encap/Decap. Keepalive Packet in GRE Encap Keepalive Phase Establishment Phase DHCPv4 Request DHCPv4 Reply with y.y.y.y CM IPv4-x.x.x.x CMTS Dynamic Stateless GRE Tunnel in MSO WLAN Network SG IPv4-y.y.y.y Preliminary Phase (Discovery) Tunnel Client List Config. * DHCPv4 GRE Discovery Option Code: TBD Ver: The version number of GRE protocol, contained in GER header. Reserved: This field is reserved for future use. Protocol Type: The Protocol Type Field contains the protocol type of the payload packet. NPE Address: NPE IPv4 Address, the endpoint of GRE tunnel. * DHCPv6 GRE Discovery Option Code: TBD Ver: The version number contained in GER header. Reserved: This field is reserved for future use. Protocol Type: The Protocol Type Field contains the protocol type of the payload packet. NPE Address: NPE IPv6 Addre