t双梁吊钩桥式起重机起升机构设计与制作 毕业设计论文.docVIP

南阳理工学院本科生毕业设计（论文） 10t双梁吊钩桥式起重机起升机构设计与制作 Design and Manufacture of Hoisting Mechanism for 10t Double-girder Bridge Crane with Hook 总计： 毕业设计（论文）24页 表 格： 1 个 插 图 ： 11 幅  南 阳 理 工 学 院 本 科 毕 业 设 计（论文） 10t双梁吊钩桥式起重机起升机构设计与制作 Design and Manufacture of Hoisting Mechanism for 10t Double-girder Bridge Crane with Hook 学 院（系）： 机械与汽车工程学院 专 业： 机械设计制造及其自动化 学 生 姓 名： 学 号： 104021020020 指 导 教 师（职称）： （讲师） 评 阅 教 师： 完 成 日 期： 2012年5月 南阳理工学院 Nanyang Institute of Technology 10t双梁吊钩桥式起重机起升机构设计与制作 近几年，随着我国起重机行业的发展，起重机生产核心技术应用与研发成为业内企业关注的重点。因此，合理的起重机设计显得尤为重要。本课题所涉及的是10t双梁吊钩桥式起重机起升机构的设计，主要是依据原始数据完成起升机构所需的钢丝绳、滑轮组和卷筒的计算与选择，根据使用要求进行联轴器和制动器的型号选择，由所需的驱动功率选择合适的电动机，确定总传动比进行合理的二级减速器设计。在完成设计的基础上，对机构部分零件的加工工艺进行编制。本次设计的起升机构性能稳定，具有良好的发展前景。 起重机；起升机构；减速器 Design and Manufacture of Hoisting Mechanism for 10t Double-girder Bridge Crane with Hook Mechanical Design, Manufacturing and Automation Major Miao Fei Abstract: With the development of crane industry in China, the application and research of crane production core technology have been emphasized by more and more enterprises in recent years. Therefore, it is important to design reasonable crane. This topic is related to the design on hoisting mechanism of 10t double-girder bridge crane with hook. The wire rope, pulley block and drum are calculated and designed based on the raw data of the hoisting mechanism, the model of coupling and brake are chosen by the requirements of hoisting mechanism, and the appropriate motor is chosen by the driving power; and the reasonable secondary reducer is calculated and designed by total velocity ratio. On the basis of accomplishing the design, the processing craft of some mechanism parts are established. The hoisting mechanism has stable performance. And it will have good prospect of development. Key words: crane; hoisting mechanism; reducer目 录 1 引言 1 1.1 国内外的发展趋势 1 1.2 本课题的研究背景与主要工作 1 2