丙烯酸改性松香水性连接料的制备与性能研究.docVIP

丙烯酸改性松香水性连接料 的制备和性能研究 学 生 姓 名 指 导 教 师 专 业 班 级 印刷工程一班 学 号 学 院 二〇一五年 月 日 毕业设计（论文）任务书 姓名 学院 班级 专业 毕业设计（论文）题目： 立题目的和意义，。。 。。 技术要求与工作计划： 时间安排： 指导教师要求： （签字） 年 月 日 教研室主任意见： （签字） 年 月 日 院长意见： （签字） 年 月 日 毕业设计（论文）： 年 月 日 摘 要 Abstract Water-based binder is an important part of the ink. The performance of the binder will directly affect the performance of water-based ink. The binder produced with rosin has the merits of low cost, high performance and low environmental pollution. Therefore it is very desirable method of connecting material production. But rosin have the disadvantages of crystallization, high acid value, non-antioxidation, and so on. The acrylic acid is used to modify the rosin. In this paper, the rosin is modified by acrylic acid. The optimal reaction conditions are determined. The reaction temperature is 190 ℃, amount of catalyst is 3.0% of rosin mass, the reaction time is 1.5h, ratio of amount of rosin and acid is 4.5: 1. After three stability experiments, the reaction conditions are the optimal synthesis process and the concentration of the final product is at about 86%. Through experiments, influence of the components to performance of the binders is investigated. Amount of acrylic will affect the PH and the degree of modification of modified rosin binders. Emulsifier will affect the solids content of binder. The more the amount of emulsifier is, the higher binder solids content is and the better drying and fixing properties of the binder are. The amount of solvent affects the viscosity and wetting of binder. According to effects of the components to performance of binder, binders and ink for different purposes and demand can be prepared. Keywords：Acrylic acid Rosin Water-based ink Emulsifier 目录 摘 要 I Abstract II 目 录 I 1 绪 论 1 1.1 本文的研究意义 1 1.1.1 印刷用水性油墨的现状