双鸭山矿业集团集贤煤矿2.4Mta新井的设计.docVIP

PAGE PAGE I摘 要本设计新井为双鸭山矿业集团集贤煤矿2.4Mt/a的新井设计，共有3层设计可采煤层，平均总厚度为16.18 m。设计井田的可采储量为241Mt。服务年限为73a。单水平开采。本设计矿井采用双斜井的开拓方式，集中大巷及采区石门的大巷布置方式。共划分3个采区，其中首采区为一个采区，投产工作面1个。本设计采区为南一，大巷道装车式下部车场，采用分区式通风，综合放顶煤采煤。年工作日为300天，采用“四、六”式工作制，工作面长为200m，每刀进度为0.6m，每日割6刀。提升设备为主井采用大倾角带式运输机提升。关键词: 回采工艺 放顶煤AbstractThe task of this design is to construct a 2.4million tons new shaft for ShuangYaShan Ming Administration.This mine has four minable Coal Seam, and its average thickness is 16.18 meters. Designed field of minable capacity is 241 million tons. It can adapt for 73years, and is divided into one level.This mine shaft is applied to double indined shaft development method; Layout of gathing gallergand mining district eross heading; This level is divided into 8 mining districts and 1 worked faces. Time of constructing shaft is 43.2 months. This worked fece is middle 1 and right 1 worked face, ords 300 days every year. Adapt “four-six” work situation, work face is 200 meters length of circle is 0.6meters, and times is 6 one day.Key words: mining technology; longwall coal mining methodPut top coal目 录 TOC \o 1-3 \u 摘要 PAGEREF _Toc171647464 \h IAbstract PAGEREF _Toc171647465 \h II绪论 PAGEREF _Toc171647466 \h - 1 -第1章 井田概况及地质特征 PAGEREF _Toc171647467 \h - 2 -1.1 井田概况 PAGEREF _Toc171647468 \h - 2 -1.1.1交通位置 PAGEREF _Toc171647469 \h - 2 -1.1.2地形地势 PAGEREF _Toc171647470 \h - 2 -1.1.3气象及地震情况 PAGEREF _Toc171647471 \h - 2 -1.1.4水文地质情况 PAGEREF _Toc171647472 \h - 2 -1.1.5煤田开发史 PAGEREF _Toc171647473 \h - 2 -1.1.6工农业及原料供应状况 PAGEREF _Toc171647474 \h - 2 -1.1.7水源及电源 PAGEREF _Toc171647475 \h - 3 -1.2 地质特征 PAGEREF _Toc171647476 \h - 3 -1.2.1矿区范围内的地质情况 PAGEREF _Toc171647477 \h - 3 -1.2.2井田范围内和附近的主要地质构造 PAGEREF _Toc171647478 \h - 3 -1.2.3煤层赋存状况及可采煤层特征 PAGEREF _Toc171647479 \h - 3 -1.2.4岩石性质、厚度特征 PAGEREF _Toc171647480 \h - 4 -1.2.5井田内水文地质情况 PAGEREF _Toc171647481 \h - 5 -1.2.6煤质、牌号及用途 PAGEREF _Toc171647482 \h - 6 -第2章 井田境界、储量、服务年限 PAGEREF _Toc171647483 \h - 7 -2.1 井田境界 PAGERE