连续采煤机电气控制系统的设计.docVIP

更多相关文档资源请访问/lzj781219完整CAD设计文件以及仿真建模文件，资料请联要更多相关文档资源请访问/lzj781219完整CAD设计文件以及仿真建模文件，资料请联要 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT II PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I中文题目:连续采煤机电气控制系统设计 外文题目：DESIGN OF ELECTRIC CONTROL SYSTEM OF CONTINUOUS MINER毕业设计（论文）共 64 页（其中：外文文献及译文23页） 图纸共1张 完成日期 2015年6月 答辩日期 2015年6月摘要本设计以“连续采煤机电气控制系统”为选题背景，以美国久益（JOY）公司的12CM15型连续采煤机为例，对原有的连采机截割部电气控制系统进行改进，详细分析和设计了采用传感器对连采机各种参数进行采集，并通过PLC、触摸屏和组态软件对连采机进行检测和控制的基本原理和方法。通过传感器和保护元件对连采机的温度参数等各种参数的采集以及对连采机截割部电动机进行过载保护，结合通信技术，将信号以模拟量或开关量的形式传送至PLC，PLC通过对信号的处理，逻辑分析来对连采机进行启动、停止和故障处理，并通过现场的触摸屏和远程的上位机组态软件对连采机进行监控，以保证连采机的安全、稳定运行。本设计主要设计连续采煤机截割部电气控制系统。关键词：?连续采煤机；截割部；电气控制 PAGE \* MERGEFORMAT II PAGE \* MERGEFORMAT II PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 1Abstract The design of continuous miner electrical control system for the background, to the United States Joy (JOY) Company 12CM15 type continuous miner, for example, even the original mining machine cutting unit electrical control system improvements , detailed analysis and design of the basic principles and methods of using sensors Continuous Mining machine parameters for the collection, and by PLC, touch screen and even the mining machine configuration software to detect and control. Through sensors and protection elements of the various parameters of mining machine parameters such as temperature acquisition and for Continuous Mining Machine cutting unit motor overload protection, combined with communications technology, the signal sent to the PLC in analog or digital form of, PLC through the signal processing, logic analysis of mining machines even start, stop, and troubleshooting, and through on-site and remote touch-screen PC configuration software to monitor even the mining machine, mining machine connected to ensure safety, stability run. The design of the main design of a continuous miner cutting unit electrical control systemKey words：Continuous miner; cutting unit; electrical control更多相关文档资源请访问/lzj78