毕业设计（论文）-大管径圆焊接坡口自动切割装置设计（全套图纸）.docVIP

PAGE II PAGE I 本科毕业论文（设计） 大管径圆管（径向）焊接坡口自动切割装置设计 摘 要随着近年来经济的快速发展，我国工业生产建设和城市化建设速度不断加快，管道焊接断面加工存在的问题也随之而来，而现在国内的有些钢管厂生产的钢管都不带坡口，或者坡口的质量都打不到焊接的要求。这就给管道施工增加了困难，成为困扰工程实施的一大难题。本课题是对大管径圆管焊接坡口自动切割装置的设计。由于是针对大管径圆管，采用常规的机床加工设备弊端较多，占地面积大，成本高，维修保养难等。因而本次设计的方案为爬管式焊接坡口切割装置。目前市面现存的爬管式切割设备种类繁多，如手摇式管道切割机，磁力式自动管道切割机，链条式自动管道切割机，定位块式管道切割机，轨道链条复合式自动管道切割机等。从精度、成本、操作难度等多方面综合考虑后确定方案为轨道链条复合式自动管道切割机。关键字：大管径圆管、焊接坡口切割、 爬管式全套图纸加153893706Double-screw extruder mixingAbstractWith the rapid development of economy in recent years, the speed of the construction of Chinas industrial production and urban construction continues to accelerate,?the pipeline welding?section?processing?problems?also follow.Now?some domestic?steel plant for the production of?steel pipe?with?groove,?groove?or?qualityare not?to the welding?requirements.?This increases the?difficulty for?pipeline construction,become a big problem for?the implementation of the project.This topic is oflarge diameter?pipe?automatic?welding groove?cutting?design.Because it is in view of the large diameter round tube, conventional machine tool processing equipment used in more, covers an area of large, high cost, difficult maintenance and so on.Thus the design scheme for pipe welding groove cutting device.At present the existing market climb pipe cutting equipment, such as manual pipe cutting machine, magnetic type automatic pipe cutting machine, chain type automatic pipe cutting machine, positioning block type pipe cutting machine, track chain compound automatic pipe cutting machine, etc. From accuracy, cost, operation difficulty determined after comprehensive consideration scheme to automatically track chain compound pipe cutting machine.Keywords: Large diameter pipe Welding groove cutting Climb the tubular目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc19531 1 引言 PAGEREF _Toc19531 1 HYPERLINK \l _Toc11412 1.1 切割机技术水平及发展趋势 PAGEREF _Toc11412 1 HYPER