VCL-MX, Drop-Insert Voice amp; Data Multiplexer - Comarracoukvcl-mx，下降插入声音amp；comarracouk数据复用器.ppt

Continued from E1 Interface (Main Link)... Peak Voltage of a space for 120 W Balanced interface 0V ± 0.3 V 75 W Unbalanced interface 0V ± 0.237 V Nominal Pulse Width 244 ns Pulse Mask as per ITU (CCITT) Rec. G.703 Output Jitter 0.05 UI (in the frequency range of 20Hz to 100 KHz) Permissible Attenuation 6 dB at 1 MHz Return Loss at: 51.2 KHz to 102.4 KHz 12dB 102.4 KHz to 2048KHz 18dB 2048KHz to 3072 KHz 14dB Jitter Tolerance As per ITU (CCITT) G.823 Loss and recovery of frame alignment : As per clause 3 of ITU (CCITT) G.732 Loss and recovery of multiframe alignment : As per clause 5.2 of ITU (CCITT) G.732 Technical Specifications Number of Channels per Card 2 Interface Type FXO,FXS, 2W / 4W EM Maximum Number of Channels 30 Transmission performance Fully Compliant to ITU (CCITT)  G.712 specification Line Impedance 600 W (900 W optional) Voice Channel Frequency 300Hz-3400Hz Insertion Loss -2.0dB Nominal (User adjustable) Idle Channel Noise ? - 65dB Return Loss 300Hz - 600Hz - 12dB 600Hz - 3400Hz - 15dB Longitudinal Balance ? 46dB between 300Hz to 3400Hz Ring Frequency 25 Hz (20 Hz, Optional) Ring Voltage ? 75 volts RMS into a load of 5 R.E.N. with a 0.30 Erlang traffic pattern Subscriber Loop Current ? 23mA into a subscriber loop of 1000 ohms Overload Level +3.14dBm ± 0.5dBm Battery Reversal All channelsDial Pulse Speed 8 -12 pps - Pulse Dialing / DTMF Dialing 2 Wire / 4 Wire - Voice Frequency Interface(s) Technical Specifications Low Speed Data Interface RS232 Interface RS232 Number of Interfaces per Card 2 Maximum Number 30 Conformity RS232 Mode Asynchronous Bit Rate 50 Kbps to 19.2 Kbps User Interface DCE Character Length 5 / 6 / 7 / 8 (Auto-Select) Stop Bits 1 / 1.5 / 2 (Auto-Select) Parity Even / Odd / 0’s / 1’s / none (Auto-Select) Low Speed Data Interface RS232 / 485 Interface RS232 / 485 Number of Interfaces per Card 2 Maximum Number 30 Confo