基于单片机的数字时钟电路论文.docVIP

PAGE PAGE I陕西省教育学院毕业论文设计题 目：基于单片机89S52的数字时钟电路 姓 名：白海燕班 级：信息1031指导老师：艾明祥日 期：2012-9-10PAGE PAGE 64【中文摘要】本设计基于单片机技术原理，以单片机芯片AT89C52作为核心控制器，通过硬件电路的制作以及软件程序的编制，设计了多功能数字时钟系统。该时钟系统主要由时钟模块、环境温度检测模块、液晶显示模块以及键盘控制模块组成。系统具有简单清晰的操作界面，能在4V～7V直流电源下正常工作。能够准确显示时间（显示格式为时时：分分：秒秒，24小时制），可随时进行时间调整，具有闹钟时间设置、闹钟开/关、止闹功能，设计以硬件软件化为指导思想，充分发挥单片机功能，大部分功能通过软件编程来实现，电路简单明了，系统稳定性高。同时，该时钟系统还具有功耗小、成本低的特点，具有很强的实用性。由于系统所用元器件较少，单片机所被占用的I/O口不多，因此系统具有一定的可扩展性。【关键词】： LCD显示 单片机 6个7段数码管【Abstract 】The design is based on the principles of microcomputer technology, based on microcontroller AT89C52 as the core controller, through the production of the hardware circuits and software programming, design of the multifunctional digital clock system. The clock system is mainly composed of a clock module, temperature detection module, LCD display module and the keyboard control module. The system is simple and clear user interface, can be in 4V ～7V DC power supply to work. Be able to accurately display the time ( HH: display format: seconds, 24 hours ), may at any time to time adjustment, has set the alarm time, the alarm on / off, stop alarm function, design of hardware and software as the guiding ideology, give full play to the function of the MCU, most of the functionality through software programming, circuit simple and clear, high system stability. At the same time, the clock system also has a small power consumption, low cost, strong practicability. Because the system uses few components, single-chip occupied by the I/O port is not much, so the system has a certain degree of scalability.【Key word.】 LCD display chip 6 7 digital tube 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc335309210 1 绪论 PAGEREF _Toc335309210 \h 2 HYPERLINK \l _Toc335309211 1.1课题的提出及研究意义 PAGEREF _Toc335309211 \h 2 HYPERLINK \l _Toc335309212 1.1.1 课题的提出 PAGEREF _Toc335309212 \h 2 HYPERLINK \l _Toc335309213 1.1.2 课题研究的意义 PAGEREF _Toc335309213 \h 4 HYPERLINK \l _Toc335309214 2.1芯片简介 PAGEREF _Toc335309214 \h 5 HYPER