钢结构详图设计标准.docVIP

The Standard of Shop Drawing For Steel Structure 钢结构详图设计标准 第一章 General Note总则 The standard is applicable for steel structure work such as bridges, ocean platform, architecture, etc., The standard should be carried out unless especial requirements of Owner. The standard forced to define the common of shop drawings. Shop drawings of specific project may vary with facilities and fabrication capacity of shop. The intent of the standard is to make detail design of steel structure and management standardization, high quality and unification.本标准适用于桥梁、海洋工程、建筑等钢结构工程。自本规定颁发后，如业主无特殊要求，均需按本规定执行。本规定对车间图纸的共通部分做了强制规定，具体项目的车间图纸内容可随工厂的设备及制造能力的不同而变化。本规定的目的是使钢结构详图设计和管理标准化、高质量化及统一化。 第二章 Primary Requirements基本要求 2.1 The Significance of Detail Design详图设计的重要性 Any fabrication and assembly of steel structure should equip technical personnel who have excellent diathesis. Shop drawing design branch is its core. The quality of shop drawing will direct affect the branch of fabrication, purchasing, QC, etc. It will bring great influence to schedule even.任何钢结构的制造和安装都需要有一支素质优良的技术人员队伍。深化设计部门是其中的核心。深化图纸的质量将直接影响到制造、采购、质检等部门，甚至会对工期产生重大影响。 2.2 Content of Detail Design详图设计的内容 The chief task of detail design is to plot initial design of steel structure put forward by architect and structural engineer to detail of construction. It contains connection strength design, shop working drawing, assembly drawing, parts drawing, material bill, typesetting drawing, etc. It may vary with various requirements of project. It must contain data and note required by fabrication. The design personnel can show the fabrication requirements such as cutting of members, hole-punching manner, bolts, weld joint through drawing paper, lineation, sizes and notes.详图设计的主要任务是将建筑工程师和结构工程师提出的钢结构初步设计进一步绘制成施工详图，工作内容主要为连接节点强度设计、车间加工图、安装布置图、零件图、材料清单、排板图等内容，具体可能随项目的要求不同而有所改变。详图内必须包含制造所必须的数据和说明。设计人员可通过图纸、线条、尺寸和注释等，标明构件的切割、打孔方式、螺栓、焊缝等制造要求 2.3 Process Relation between Detail Design and Fabrication, Assembly详图设计与制造、安装等的工艺关系 Detail design is ve