3-第三章粉压制成形原理.ppt

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 使用组合模冲时料腔高度的计算： 若：d松=2.4g/cm3， d坯=6.6g/cm3 K= d坯/d松=2.75 ∴ H松1= Kh坯 =13.75mm H松2 =55mm School of Materials Science and Engineering * 带台阶压坯的压制： School of Materials Science and Engineering * School of Materials Science and Engineering * 3.带斜面压坯的压制 School of Materials Science and Engineering 计算的装粉面位置 x * 4.带曲面压坯的压制（自学） School of Materials Science and Engineering * 第五节 粉末压坯的强度 压