物理模型特性和三维仿真模型的验证状态,沸水型反应堆压力壳内核心退化：（Physical model features and validation status of three-dimensional simulation model for BWR in-vessel core degradation）.pdfVIP

Annals of Nuclear Energy 105 (2017) 168–183 Contents lists available at ScienceDirect Annals of Nuclear Energy journal homepage: www.elsevier .com/locate/anucene Physical model features and validation status of three-dimensional simulation model for BWR in-vessel core degradation Tsuyoshi Okawa ⇑, Shigeki Shiba, Tetsuo Nakajima Regulatory Standard and Research Department, Secretariat of Nuclear Regulation Authority (S/NRA/R), 1-9-9 Roppongi-First Bldg, Roppongi, Minato-ku, Tokyo 106-8450, Japan a r t i c l e i n f o a b s t r a c t Article history: After the severe accident at Fukushima Daiichi Units 1–3 in 2011, Regulatory Standard and Research Received 29 November 2016 Department, Secretariat of Nuclear Regulation Authority (S/NRA/R) initiated the development of a Received in revised form 27 February 2017 Boiling Water Reactor (BWR) in-vessel detailed core degradation model (called ‘‘Multifunction Model”) Accepted 9 March 2017 for decreasing computational uncertainties of severe accidents as a fundamental research activity. The Available online 16 March 2017 objective of this study is to present the validation status of the Model against in-vessel core degradation phases, focusing on the description of important physical models and validation scheme. The Model focuses on in-vessel core degradation from cladding temperature rise to molten material flow