卡板冲压工艺及模具的设计.docVIP

内容提要 模具工业是现代工业发展的基础，冲压模具是模具工业的重要组成部分。近年来，与机械相关的各个行业都越来越重视模具的设计与应用，不仅是因为模具已发展成为一项比较成熟的共性技术模具工业中发挥越来越重要的作用。 Abstract The mould industry is the foundation of the modernization industry, and stamping die plays a very important part in die industry. In recent years, each industry that related with mechanics is all paying more and more attention to the design and application of mould. That is not only because mould has already been developed into one ripe generality technology, but also because mould plays a more and more important role in modernization industry. In the graduation project, the structure of clip board is introduced at first. The technological characteristics of the clip board is analyzed. The die of the clip board is designed according to its structural characteristics. The layout design of the progressive die for forming the part and the designs of the work positions, general structure of the die, the punch and matrix of the progressive die, retaining plate, the structure of the block lifting device, the structure of the stripping plate, and the technical requirements for the material and heat treatment of each component are mainly stated. In addition, the design of the single-operation die for bending is introduced. The die structure is simple, the processing quality of the die is good and the productivity is high. During the design, unavoidable I met some difficulties in the design, but I have conquered them with my assiduity. It’s my first time to practice of the design of mold, so I believe that it will be great helpful for my job in the future. Keyword：stamping die，clip board ，the progressive die 前 言 1 1 绪论 3 1.1　我国冲压模具业发展现状 3 1.2我国冲压模具制造技术发展趋势 4 2零件工艺分析及确定工艺方案和模具结构类型 7 ２.1　产品零件图 7 ２.２　工艺分析 9 2.2.1 工艺审核 9 2.2.2工件工艺分析 10 ２.３　工艺方案及模具结构类型 11 2.3.1.冷冲模类型与结构 11 2.3.2 冲裁模冲裁工艺过程（即冲裁原理） 13 2.3.3 零件方案确定 14 3　连续模 15 ３.１　半成品零件图 15 ３.２连续模的工作原理 16 3.3工件工艺分析 17 ３.4工艺方案及模具结构类型 17 ３.5排样设计 18 3.5.1排样的设计 18 3.5.2最小工艺搭边值的选择 19 3.5.3. 送料步距的计算 19 3.5.4. 条料宽度的计算 2