（荐）基于ARM的嵌入式温度监测系统毕业设计论文［精选整理］.doc

毕业设计说明书 基于ARM的嵌入式温度监测系统 摘 要 随着科技的发展，嵌入式系统的发展也异常迅速，同时，嵌入式系统已经应用于各个方面，给人们的生产和生活带来了极大的便利。目前嵌入式系统的应用已经发展到了嵌入式处理器与操作系统相结合的阶段，本设计就是将ARM处理器与Linux操作系统相结合实现的。 嵌入式温度监测系统由温度监测硬件系统和温度监测软件两部分组成。其中硬件系统包括SBC2410开发套件，温度检测电路、信号放大电路及信号显示终端，论文中按模块对各部分硬件的设计进行了详细的介绍。 温度监测软件系统的设计过程如下，本设计首先为温度监测系统构建Linux环境，其次在Linux下编写并加载系统驱动程序，然后编写应用程序，编译并下载到ARM开发板中。经过反复调试，实现了温度监测的功能。 关键词： ARM；linux；内核；驱动；温度监测 Embedded System of Temperature Testing Based on ARM Abstract With the development of science, embedded system develops at a fast speed. Embedded system has been applied to all aspects, which has brought great convenience to peoples production and daily life. At present, the application of embedded system have been developed to the stage of combining embedded processor with operating system, and the design comes true based on combining the ARM processor with linux operating system. Embedded temperature measurement system includes temperature monitoring hardware and software systems. Hardware system includes SBC2410 system development kit, temperature detection circuit, signal amplifier circuit and signal display terminal. This paper, in detail, introduces the hardware design according to modules. The process of the design of temperature measurement software system is as follows: First，the design construct Linux environment for temperature measurement the system .Secondly, the design compiles and loads driver program in Linux; At last, the design writes, compiles and downloads the application program to ARM development board. After repeated debugging, the design achieves the purpose of the temperature measurement. Key words: Linux ; ARM ; Kernel ; Drivert ; Emperature measurement 目 录 TOC \o 1-3 \h \z \u TOC \o 1-3 \h \z \u HYPERLINK \l _Toc201155773 摘 要 PAGEREF _Toc201155773 \h I HYPERLINK \l _Toc201155775 Abstract PAGEREF _Toc201155775 \h II HYPERLINK \l _Toc201155776 第一章 嵌入式系统简介 PAGEREF _Toc201155776 \h 1 HYPERLINK \l _Toc201155777 1.1 嵌入式系统的概念 PAGEREF _Toc201155777 \h 1 H