日处理100t液态奶的婴儿配方乳粉工厂设计论文.docVIP

PAGE ii - - 日处理100t液态奶的婴儿配方乳粉工厂设计 摘　　要 本设计主要是进行日处理量为100t鲜奶的婴儿配方粉的乳粉工厂设计。该厂每日可产婴儿配方粉30.67吨，投资回收期约为2.04年。 本文是根据食品厂设计的要求，进行了生产工艺和产品方案的制定、车间平面设计、利用AutoCAD制作出工艺流程图和车间的平面布置图、进行物料衡算及设备的热量衡算、对生产设备进行选型并进行了经济技术分析。 整个设计充分考虑了目前的经济状况和今后发展的需要，从节能的角度出发选择设备。生产流程充分考虑到机械化、自动化，技术上先进、可靠，布局合理规范。 关键词：婴儿奶粉；工艺设计；三效降膜蒸发器；喷雾干燥塔 The design is mainly about the 100-ton workshop of infant formula milk power Abstract The design is mainly about the 100-ton workshop of infant formula milk powder. The factory can produce daily infant formula powder 30.67 tons, the investment capital is recovered in abou2.04 years, that is, about (two year and a half). This paper is based on the design requirement, milk powder factory production technology and product plan formulation, the workshop graphic design, use autoCAD produce process flow diagram and workshop layout, equipment and materials calculation of heat balance to calculate, production equipment selection and economic and technical analysis. The whole design is fully considered the current economy and the requirement of the future develop and the equipment is selected in view of saving energy source. The mechanization and automatization of the process flow is improved as possible. Meanwhile, we do our most to search for the advanced and credible technology and to make the layout reasonable and normal. Keywords: infant milk；production process； three-falling film evaporator； spray drier 目　　录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc 摘　　要 PAGEREF _Toc \h i HYPERLINK \l _Toc Abstract PAGEREF _Toc \h ii HYPERLINK \l _Toc 第1章 绪　　论 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 1.1 国外乳品工业现状 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 1.1.1 乳制品市场发展趋势 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 1.1.2 婴儿配方粉发展前景 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 1.2 设计依据及意义 PAGEREF _Toc \h 2 HYPERLINK \l _Toc 1.2.1 设计依据 PAGEREF _Toc \h 2 HYPERLINK \l _Toc 1.2.2 设计内容 PAGEREF _Toc \h 2 HYPERLINK \l _Toc 1.2.3 设计意义 PAGEREF _Toc \h 3 HYPERLINK \l _Toc 第2章 工艺流程确定及其论证 PAGEREF _Toc \h 4