挖掘装载机转载机构的拓扑优化与动力学仿真研究-topology optimization and dynamic simulation research of loader transfer mechanism.docxVIP

Abstract Abstract 万方数据 万方数据 The appearance of the backhoe loader has improved the efficiency of the coal-mining work, the applying of backhoe loader transferring mechanism had improved the efficiency of material transport system of backhoe loader. Traditionally, the backhoe loader transferring mechanism didnt connect with slag removing and it needed manpower to move, which wasted a lot of time. However, this article has been supposed to design a kind of transferring mechanism that directly connected with backhoe loader. This design adopted modern design method to analyze the structure design with Statics and apply topology optimization to the key support cantilever component and emulated the dynamics of backhoe loader’s pitching swing to prove the retionality of optimization. The paper included: Firstly, this article built the backhoe loader transferring mechanism measurements geometric model according to the work environment and designed demands of backhoe loader. In ANSYS, it analyzed stopcock and support cantilever, two key components, at the Statics and the results showed that it reached the stiffness requirements, The supporting cantilever model in which the stress close to the yield strength of the material, which should be optimized. In addition, applied topology optimization to the support cantilever model in the solid Thinking Inspire according to the Statics analysis results and reconstructed a optimization model. Then , did the statics analysis on it. Contrasting with the old model. Finally, basing on the virtual prototype technology, the ADAMS emulated the support cantilever model and pitching swing before and after optimization ,analyzing ever hinge’s stress condition of the support cantilever in the limit load and no load. Key words: backhoe loader transferring mechanism topology optimization dynamic simulation III 目录 目 录 HYPERLINK \l _bookmark0 选题依据与意义1 HYPERLINK \l _bookmark1 国内外文献资料综述 2 HYPERLINK \l _bookmark2 1 绪论5 HYPERLINK \l _bookmark3