2种复合树脂磨牙充填修复疗效观察.docVIP

2种复合树脂磨牙充填修复疗效观察 　　[摘要] 目的 探讨2种复合树脂磨牙充填修复的疗效。方法 方便选取2013年5月―2014年5月于该院住院的92例磨牙缺损的患者采用随机数字表法均分为两组。对照组（46例）采用常规通用型复合树脂（3mz350）进行填充修复磨牙缺损处，观察组（46例）采用磨牙专用型复合树脂（P60）进行填充修复磨牙缺损处。依据美国卫生署（USPHS）2006年颁布的修复体评价标准对两组患者治疗6个月后的磨牙充填修复情况进行评价；采用Geomagic Qualify软件的3D偏差分析两组修复体表面及釉质咬合面的平均磨损深度（RSH/EOCH）。进而比较两组修复体治疗12个月的磨损深度和磨损体积。结果 治疗12个月后，两组磨损深度和磨损体积的比较差异无统计学意义（P0.05）；治疗6个月后观察组患者各项填充修复成功率为色泽匹配度89.13%、边缘着色95.65%、牙髓反应86.96%、边缘密合性95.65%、继发龋97.83%、修复体折裂93.48%均较对照组71.74%、80.43%、67.39%、82.61%、84.78%、76.09%显著较高，差异有统计学意义（P0.05）。 结论 在临床上填充修复缺损的磨牙时，短期内P60型复合树脂较常规通用型复合树脂（3mz350）的各项填充修复成功率较高，但长期使用后，两种材料的耐磨性能相同。 　　[关键词] 复合树脂；磨牙缺损；填充；修复；疗效 　　[中图分类号] R5 [文献标识码] A [文章编号] 1674-0742（2016）08（c）-0058-03 　　Observation of Efficacy of Two Kinds of Compound Resin Molars Filling Repairment 　　MA Jia 　　Department of General Medicine， Xiamen Stomatological Hospital， Xiamen， Fujian Province，361004 China 　　[Abstract] Objective To observeefficacy of two kinds of compound resin molars filling repairment. Methods Convenient selection 92 inpatients with molars defect in our hospital from May 2013 to May 2014 were divided by random number table into two groups equally. Control group （46 cases） received conventional general type compound resin （3mz350） to fill and repair molars defect， observation group （46 cases） received molars tailored version compound resin （P60） to fill and repair molars defect. According to restorations evaluation standard promulgated by United States Public Health Service in 2006， molars filling and repairment of patients after 6 months of treatment were estimated； 3D deviation in Geomagic Qualify software was used to analyze average wearing depth in restoration surface and enamel facies incisalis （RSH/EOCH） in the two groups.Wearing depth and wear volume after 12 months of restoration repairment in the two groups were compared. Results After 12 months of treatment， there was no significant difference in wearing depth and wear volume in the two groups （P0.05）； after 6 months of treatment，