基于AT9C51称重系统设计.docVIP

基于AT89C51称重系统设计 内 容 摘 要 近年来，随着电子衡器产品的发展及国内外市场的需求变化，对电子衡器的要求偏向于智能化，模块化，系统化，微型化，集成化; 快速，高精度，高可靠性，高稳定性成为其技术性能主要要求指标;其价格趋向是更加物美价廉；其功能要求是非控制信息和称重计量控制信息协调并重的的智能化;最后不得不提的是其应用性能更加接近于结合和集成综合发展。结合以上的分析要点，本设计的提出对于现实的发展要求是非常具有实际意义和利用价值的。 我的创新点是以AT89S51单片机为基础而作的的电子称重设备相关设计。首先，论述了数字电子秤的发展背景和设计方案，接着概述了软件系统和硬件系统的设计，最后的流程给出了电路硬件方面的设计细节。放大滤波电路，信号转换器，信号前级的传感器和电阻应变式传感器这四个部分组成了该系统。单片机在其中发挥重要作用，其完成控制各个部分的协调工作和数据处理工作，利用重量和输出电压的线性关系，建立相关的数学模型，实现重量单位量纲由电压单位量纲代替。一定数量的LED管与矩阵键盘组成人机对话部分，最后通过键盘控制，显示重量及价格相关讯息。 关键词 关键词汇：单片机；传感器；A/D转换器；信号放大电路；滤波电路 Abstract In recent years, with changes in demand for electronic weighing products development and domestic and international market, the requirements for electronic weighing biased in favor of intelligent, modular, systematic, miniaturization, integration; rapid, high-precision, high reliability, high stability as its main requirements of technical performance indicators; their prices tend to be more affordable; its non-functional requirements and weight measurement control information, control information to coordinate both the intelligence; Finally I must mention is its application performance closer combination and integration of comprehensive development. So combining the above analysis points, made ??the design requirements for the realities of development is very meaningful and of value. My point is innovation and AT89S51 microcontroller based electronic weighing equipment for the instructions. First, discusses the development of digital electronic scales background and design, and then outlines the design of software systems and hardware systems, the final process gives the circuit hardware design details. The system is composed of the amplification and filter circuit, a signal converter, before the signal level of the sensor and the four resistance strain sensor part. SCM play an important role in this, which completes the control and coordination of the various parts of the data processing, the use of a linear relationship between weight and ou