城郊煤矿2.4Mta新井设计（浅析锚网索钢带耦合支护技术研究运用）.docVIP

PAGE 摘 要 本设计包括三个部分：一般部分、专题部分和翻译部分。 一般部分为城郊煤矿2.4Mt/a新井设计。城郊煤矿位于河南省永城市，井田南北长约6.5km，东西宽约6.1km，勘探面积约35.3km2。此井田中只有1煤层厚7.13m，这层煤从厚度和赋存条件是可采煤层。井田工业储量为35935.52万t ，矿井可采储量23567.1923万t，矿井服务年限为70.1a。井田开拓采用立井两水平开拓，暗斜井延伸。采煤方法采用综合放顶煤采煤，工作面布置为带区式布置。大巷布置为皮带大巷运煤兼进风，轨道大巷回风兼辅助运输，。矿井通风方式为中央并列式,掘进头采用局扇通风。 矿井总需风量为4730.4m3/min，通风阻力容易时期为956.5Pa，困难时期为1617.5Pa。矿井巷道等积孔容易时期为3.08m2，困难时期为2.38m2。通过计算决定选用FBDCZ(B)-12-No28轴流式通风机，其能满足矿井对风量的要求。 综上所述，城郊矿通风系统简单，合理，稳定，满足通风要求，抗灾能力强。 专题部分题目是浅析锚网索钢带耦合支护技术及运用，主要是研究倾斜煤层深部开采时的支护方法。 翻译部分主要内容为锚网索钢带耦合支护技术研究。 英文题目为：Measuring pillar width in trona mines using a body wave based in-seam seismic technique 关键词：城郊矿; 新井通风设计; 锚网索钢带耦合支护技术; 体波 ABSTRACT This design consists of three parts: The general part, the special part and the translation part. The productive capacity is 2.4 million tons per year. The Cheng Jiao minefield lies in the special area of Yong Cheng city, Henan province. Total area of the mine is 35.3 km2. The boundary of the minefield runs 6.5 km on north south and 6.1 km on west east on average. There are one main seams—the third layer with thickness of 7.13 meters. According to the thickness and deposit, this coal layer is able seams. The industrial storage of the mine field is 359.3552 million ton, the reserves exploitable in the whole mine field is 235.671923 million ton，and it’s service life is 70.1 years, with only one working faces is used in the mine. Two standards development are used in the Mine shaft pioneering,with subinclined shaft extension.The Coal mining use a comprehensive top coal caving mining.The track roadway with the airflow into are mainly used to transported the coal while the belt roadway are used to the auxiliary transport with the return of airflow.The method of whole mine ventilation is central juxtapose ventilation system.The ventilation of the dead-end working places is the application of the auxiliary ventilation by the auxiliary fans. The total amount of wind required is 4730.4m3/min, and the ventilation resistance 956.5P