外文文献翻译中英文对照plc翻译论文.docVIP

无 锡 职 业 技 术 学 院 毕业设计说明书（英文翻译） PAGE PAGE 1 英文 The basic concepts of PLC PLC (Programmable Controller) is a computer in a family, is designed for industrial control applications manufactured. Early known as programmable logic control PLC (Programmable Logic Controller), referred to as PLC, which is mainly used to replace the relay logic control to achieve. As technology advances, the devices functionality has been greatly exceeded the scope of logic control, therefore, today, such a device known as programmable controllers, referred to as PC. However, in order to avoid a personal computer (Personal Computer) short confusion, it will be referred to as programmable logic controller PLC. PLC Origin In the 60 years, automobile production line automatic control system are basically constituted by a relay control device. Each time the car was modified relay control devices are a direct result of the re-design and installation. With the development of production, car models update cycle becomes shorter, so that relay control devices often need to re-design and installation is very time-consuming, labor intensive, and costs expected, and even hindered the shorter update cycle. To change this situation, the U.S. General Motors Corporation in 1969, open tender, asking that the new control device to replace the relay control unit and made a tender 10 indicators, namely: 1. Programming convenience, the site can modify the program; 2. Easy maintenance, modular structure; 3. Reliability is higher than relay control device; 4. Smaller than relay control device; 5. Data can be directly sent to the management computer; 6. Costs can be competitive with the relay control device; 7. Input can be AC 115V; 8. Output AC 115V, 2A above, can directly drive solenoids, contactors, etc.; 9. In the expansion, the original system as long as the small change; 10. User program memory capacity can be expanded to at least 4K. In 1969, the U.S. Digital Equipm