基于单片机和加速度传感器跌倒检测设备设计.docVIP

  • 12
  • 0
  • 约3.49千字
  • 约 7页
  • 2018-08-29 发布于福建
  • 举报

基于单片机和加速度传感器跌倒检测设备设计.doc

基于单片机和加速度传感器跌倒检测设备设计

基于单片机和加速度传感器跌倒检测设备设计   【摘 要】随着老龄化的加速,老人健康的问题越来越得到社会的关注,其中,跌倒是危害老人健康的重要原因。本文采用Arduino硬件平台、JY901加速度传感器模块和SIM900A串口GPRS模块构建了一种跌倒监测系统。该系统通过串口采集加速度传感器模块的运动数据,送到单片机进行跌倒检测,GPRS模块将跌倒状态发到服务器远端。该系统成本较低,能较精确地实现跌倒检测。   【关键词】Arduino;加速度传感器;跌倒检测   【Abstract】With the acceleration of aging problem, people pay more attention to the health problem of the elders. The falling down of the elders is an important cause for harming their health. This paper proposes a falling detection system by using Arduino platform, JY901 accelerometer and SIM900A GRRS module. The motion data sensed by accelerometer is sent to

文档评论(0)

1亿VIP精品文档

相关文档