常见的表格面工艺处理及不良分析.pptVIP

Stamping 冲压 Polishing 抛光 Process: Plating 电镀 The sample is made by stainless steel, after high quality polishing, then arrange vacuum plating. 1/. Polish requirement: mirror polish, any scratch and dent can not be accepted, so the yield rate is low (about 80% at polish process). 需要镜面抛光，不良率较高。 2/. Big and flat part is suitable for mirror polish, one small round will be made after polished (R0.2 ~ R0.3mm). So the edge will not be too sharp. 3/. After polished, arrange PVD to make different color what we want. 此样板的材质为不锈钢，高质量的抛光后，再安排真空电镀以实现不同的颜色。 5. 抛光 Polishing 5. 抛光 Polishing Design: Surface is