挪威船级社材料与焊接规范na7z484d.docVIP

RULES FORCLASSIFICATION OFSHIPS / HIGH SPEED, LIGHT CRAFT ANDNAVAL SURFACE CRAFTNEWBUILDINGSMATERIALS AND WELDINGPART 2 CHAPTER 1GENERAL REQUIREMENTS FOR MATERIALSJANUARY 2003This booklet includes the relevant amendments and corrections shown in the January 2006 version of Pt.0 Ch.1 Sec.3.CONTENTSPAGESec.1Manufacture, Survey and Certification5Sec.2Testing Procedures 7DET NORSKE VERITASVeritasveien 1, NO-1322 H??vik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 CHANGES IN THE RULES Genewith NV or works certificatequot;.ral—Item A301 has been amended to inform that approved manufac-The present edition of the Rules includes additions and amendmentsturers can be found on DNV Exchange on the Internet.decided by the Board in December 2002, and supersedes the January1993 edition of the same chapter.??Section 2 - Testing ProceduresThe Rule changes come into force on 1 July 2003.—Figures 5 and 6, quot;Examples of test pieces for Z direction tensiletestingquot;, have been deleted.This chapter is valid until superseded by a revised chapter. Supple-—Sub-section B500, quot;Z direction ductility testingquot; has been delet-ments will not be issued except for an updated list of minor amend-ed.ments and corrections presented in Pt.0 Ch.1 Sec.3. Pt.0 Ch.1 is—Sub-section B600 has been renumbered to read B500.normally revised in January and July each year.—Sub-section B700 has been renumbered to read B600.Revised chapters will be forwarded to all subscribers to the Rules.Buyers of reprints are advised to check the updated list of Rule chap-ters printed in Pt.0 Ch.1 Sec.1 to ensure that the chapter is current.Corrections and Clarifications.In addition to the above stated rule requirements, a number of detect-ed errors, corrections and clarifications have been made in the exist-Main changesing rule text.??Section 1 - Manufacture, Survey and Certification—Item A301 has been amended to include the wording quot;deliveredComments to the rules may be sent by e-mail to rules@For subs