【AS澳大利亚标准】AS 1544.2-2019 Methods for impact tests on metals - Charpy V-notch.doc.docVIP

Licensed Licensed to Colin M. Lorrimar MTS Met on 22 May 2007. 1 user personal user licence only. Storage, distribution or use on network prohibited. AS 1544.2 Australian Standard? Method for impact tests on metals Part 2: Charpy V-notch The Standard is downloaded from HYPERLINK HYPERLINK / Standard SharingThis Australian Standard was prepared by Committee MT-006, Mechanical Testing of Metals. It was approved on behalf of the Council of St The Standard is downloaded from HYPERLINK HYPERLINK / Standard Sharing 15 August 2003 and published on 19 September 2003. The following are represented on Committee MT-006: Australasian Railway Association Australasian Aluminium Council Australian Industry Group Licensed to Colin M. Lorrimar MTS Met on 22 May 2007. 1 user personal user licence only. Storage, distribution or use on network prohibited.Bureau of Steel Manufacturers of Austra Licensed to Colin M. Lorrimar MTS Met on 22 May 2007. 1 user personal user licence only. Storage, distribution or use on network prohibited. CSIRO Measurement Laboratory CSIRO Telecommunications and Industry Physics Institute of Materials Engineering Australasia Keeping Standards up-to-date Standards are living documents which reflect progress in science, technology and systems. To maintain their currency, all Standards are periodically reviewed, and new editions are published. Between editions, amendments may be issued. Standards may also be withdrawn. It is important that readers assure themselves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased. Detailed information about Standards can be found by visiting the Standards Australia web site at HYPERLINK .au .au and looking up the relevant Standard in the on-line catalogue. Alternatively, the printed Catalogue provides information current at 1 January each year, and the monthly magazine, The Global Standard, h