对讲机后盖注塑模具设计.docVIP

PAGE PAGE VI 摘 要 针对对讲机后盖进行了注塑模具设计。通过对塑件进行工艺的分析和比较,最终设计出一副注塑模。该课题从产品结构工艺性，具体模具结构出发，对注塑机的选择及有关参数的校核、模具的分型面、浇注系统、模具成型部分的结构、推出系统、冷却系统进行了设计。同时运用三维pro/E制图软件绘制该模具，与平面图相比更具立体感。 关键词：注塑模具；浇注系统；冷却系统；校核 Abstract This topic is mainly for radio shell mold design, plastic parts through the process of analysis and comparison to the final design an injection mold. Process from the product structure on the subject of, specific mold structure to the sub-surface of the mold, pouring system, the mold forming part of the structure, launch systems, cooling systems, injection molding machine of choice and the parameters of the calibration, are detailed design.At the same time drawing zhe molds use to three-dimensional mapping program of pro/E,this computer graphics system has the impasto compared to the plain view drawing. Key words：injection mold；system of gating；system of cooling；checking. 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc295714730 摘 要 PAGEREF _Toc295714730 \h I HYPERLINK \l _Toc295714731 Abstract PAGEREF _Toc295714731 \h II HYPERLINK \l _Toc295714734 第1章 绪论 PAGEREF _Toc295714734 \h 1 HYPERLINK \l _Toc295714735 1.1 模具工业的应用概况 PAGEREF _Toc295714735 \h 1 HYPERLINK \l _Toc295714736 1.2 我国塑料模具工业的发展概况 PAGEREF _Toc295714736 \h 2 HYPERLINK \l _Toc295714737 第2章 方案选择 PAGEREF _Toc295714737 \h 4 HYPERLINK \l _Toc295714738 2.1 注射模的组成与分类 PAGEREF _Toc295714738 \h 4 HYPERLINK \l _Toc295714739 2.1.1 注射模的组成 PAGEREF _Toc295714739 \h 4 HYPERLINK \l _Toc295714740 2.1.2 注射模的分类 PAGEREF _Toc295714740 \h 5 HYPERLINK \l _Toc295714741 2.2 塑件成型工艺分析 PAGEREF _Toc295714741 \h 5 HYPERLINK \l _Toc295714742 2.2.1 注射模的设计方法与研究现状 PAGEREF _Toc295714742 \h 5 HYPERLINK \l _Toc295714743 2.2.2 塑件分析 PAGEREF _Toc295714743 \h 6 HYPERLINK \l _Toc295714744 2.2.3 制品材料的成形特性与工艺分析 PAGEREF _Toc295714744 \h 8 HYPERLINK \l _Toc295714745 2.3 注射成型机的选择 PAGEREF _Toc295714745 \h 10 HYPERLINK \l _Toc295714746 2.3.1 注射量的计算 PAGEREF _Toc295714746 \h 10 HYPERLINK \l _Toc295714747 2.3.2 浇注系