半刚性钢框架稳定性分析及承载性能研究岩土工程专业论文.docxVIP

PAGE PAGE IV 南昌航空大学硕士学位论文 Abstract instable buckling load of semi-rigid steel frames and obtain the buckling load of semi-rigid steel frames. Comparatively analyze the calculation results and the accurate solutions solved by the column effective length coefficient method. The results show that the calculated results obtained by the finite element method derived in this paper and column effective length coefficient method are basically consistent. Third, the paper will study the load capacity of semi-rigid steel frames. Derive the calculation formula of beam-column stiffness ratio influence on internal force and displacement of semi-rigid steel frames through using the matrix displacement method. Calculate by MATLAB language program, Solve the internal force and displacement of semi-rigid steel frames. Comparatively analyze calculation results and corresponding fully rigid frame. Furthermore some advises were provided for engineering design Finally, prospect the further study on semi-rigid steel frames in the future. Keywords: semi-rigid steel frame, finite element method, stability, beam-column stiffness ratio, load-carrying capacity 南昌航空大学硕士学位论文目 南昌航空大学硕士学位论文 目 录 目 录 摘 要 I Abstract II HYPERLINK \l _bookmark0 目 HYPERLINK \l _bookmark0 录 IV HYPERLINK \l _bookmark1 第 HYPERLINK \l _bookmark1 1 HYPERLINK \l _bookmark1 章 HYPERLINK \l _bookmark1 绪 HYPERLINK \l _bookmark1 论 1 HYPERLINK \l _bookmark1 1.1 研究背景和意义1 HYPERLINK \l _bookmark2 1.2 问题的提出2 HYPERLINK \l _bookmark3 1.3 半刚性钢框架的国内外研究现状3 HYPERLINK \l _bookmark4 1.4 本文的研究内容7 HYPERLINK \l _bookmark5 第 HYPERLINK \l _bookmark5 2 HYPERLINK \l _bookmark5 章 HYPERLINK \l _bookmark5 半刚性连接的基本理论 9 HYPERLINK \l _bookmark5 2.1 概述9 HYPERLINK \l _bookmark5 2.2 半刚性连接节点类型及特性9 HYPERLINK \l _bookmark6 2.3 半刚性连接的研究方法12 HYPERLINK \l _bookmark7 2.4 半刚性连接的分类方法13 HYPERLINK \l _bookmark8 2.5 半刚性连接的弯矩-转角(M-θ) HYPERLINK \l _bookmark8 曲线模型 14 HYPERLINK \l _bookmark9 2.6 各国规范对半刚性节点的规定19 HYPERLINK \l _bookmark10