电容式涡街流量计的研究-仪器仪表工程专业论文.docxVIP

哈尔滨工业大学工程硕士学位论文 - II - Abstract Flow measurement is a significant part of Measurement science and technology, and plays an inestimable role in the national economy, national defense construction and scientific research. With the rapid development of the industrial production, the demand for accuracy and range of flow measurement is much higher. Due to its simple structure design, reliable performance, long working life and wide measurement range, etc, Vortex Flowmeter has been more and more applied into the industrial field measurement. Vortex Flowmeter develops towards two directions: anti-interference and low power comsumption. In order to facilitate practical application, this thesis is mainly aimed at solving the problem of the weak ability of anti-interference of Vortex Flowmeter in the practical work. The content of thesis includes the followings: On the basis of deep analysis and study on the working principle of Vortex Flowmeter , the performance characteristics of Vortex Flowmeter have been summarized and analyzed through reading the relevant materials and collecting a great deal of data, document, thesis, ect. In order to bring the interference caused by environment to a minimum, the anti-interference design of capacitive transducer has been used. As for the signal detection, it measures vortex frequency through differential pressure principle, finally displays the output transformed into the flow through secondary instrument. Designing the differential amplifier circuit to collect the field signal, the differential amplifier circuit has been taken advantage of to remove the capacitance signal of the same size and the interference signal acting on two capacitances at the same time to enhance the measurement accuracy. So as to improve the function of original Vortex Flowmeter which could only read the field data and not save the historical data for analysis, the host computer procedure has been specially written through RS232 and F410 UART to o