SIEMENS_S7-400PLC在造纸过程碱回收车间燃烧工段中的应用（毕业学术论文设计）.docVIP

PAGE II PAGE III SIEMENS S7-400PLC在造纸过程碱回收车间燃烧工段中的应用 摘 要 随着造纸工业规模的不断扩大，造纸企业对造纸过程中的自动化程度要求越来越高。在我国，造纸企业在生产过程中采用的微机监视与控制系统一般为单独运行且分散在各个设备处，没有进行对整个生产过程进行集中实时监控，使得生产管理人员无法及时全面地了解各个生产环节的生产状态，难以做到及时、准确地指挥生产。本论文设计是利用PLC系统对造纸过程中制浆环节进行控制，具有安全可靠，通用灵活的特点，从而实现对整个造纸生产流程的自动化监控。 本论文重点是对碱回收燃烧工段的系统分析与研究，提出了一种安全可靠的控制方案。详细介绍了系统中西门子S7-400系列PLC所用到的各种硬件模块的选型和组态。 关键词：碱回收，燃烧，PLC，WINCC SIEMENS S7-400 PLC Recovery Workshop in the Process of Burning Paper in the Application of Section ABSTRACT Along with the industrial scale of paper spreading time and again, the papermaking enterprise is more and more high to in the papermaking process automaticity request. In our country, the papermaking enterprise the microcomputer surveillance and the control system which uses in the production process generally for alone moves also disperses in each equipment place, has not carried on to the entire production process carries on the centralism to monitor at times, causes the production management personnel to be unable promptly comprehensively to understand produces the link one by one the production condition, achieves with difficulty promptly, accurately directs the production. In this paper, the design is the use of PLC systems in the pulp and paper manufacturing process control link with a safe, reliable, universal and flexible features, the entire paper in order to achieve the automation of production process monitoring. This paper focused on the Recovery Combustion Process Analysis and Research, a safe and reliable control programme. Details of the system in the Siemens S7-400 series PLC used by the various hardware module selection and configuration. KEY WORDS：Soda recovery，Combustion ，PLC，WINCC 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc232781601 摘 要 PAGEREF _Toc232781601 \h I HYPERLINK \l _Toc232781602 ABSTRACT PAGEREF _Toc232781602 \h II HYPERLINK \l _Toc232781603 1 绪 论 PAGEREF _Toc232781603 \h 1 HYPERLINK \l _Toc232781604 1.1引言 PAGEREF _Toc232781604 \h 1 HYPERLINK \l _Toc232