600MW发电机组回热加热器设计（毕业学术论文设计）.docVIP

w w w 摘 要 现代热力发电厂的汽轮机都无一例外的采用给水回热加热，回热系统既是汽轮机热力系统的基础，也是全电厂热力系统的核心，它对机组和电厂的热经济性起着决定性的作用。当所研究的系统造价昂贵、实验的危险性大或需要很长的时间才能了解系统参数变化所引起的后果时，仿真是一种特别有效的研究手段。火电机组仿真，就是仿真技术在火电生产领域的一种应用。本篇论文主要是针对600MW发电机组回热加热器仿真模型的建立及经济运行分析所进行的研究。 本文主要研究的是回热加热系统仿真的优点及发展现状和发展方向，介绍了回热加热器仿真对现代电厂的重要意义，并合理分析其经济运行的方式及提出一些有效改进的措施。 本文针对600MW发电机组回热加热器的特点进行了动态的建模，然后参考某电厂的600MW发电机组回热加热器的额定参数在STAR-90仿真系统上进行仿真，并对仿真结果进行了对比验证。 最后，本文在建模阶段完成之后，提出了一些对回热加热器经济运行所提出的一些该进措施和一些影响回热加热器性能的要素。并指出对回热加热器的仿真研究仍将是今后电厂对机组改进的主要研究方式。 关键词 电力系统，回热加热器，仿真模型，经济运行分析 Abstract Modern thermal power plant turbine not using regenerative water heating, heat recovery system of steam turbine thermal system is based, is the core of thermodynamic system in power plant, it on the unit and the power plant thermal economy plays a decisive role. When the system is costly, dangerous experiment or take a long time to understand the system parameter changes caused by the consequences, the simulation is a particularly effective research methods. Power plant simulation, simulation technology in thermal power production is one of the application. This paper is mainly directed against the 600MWpower unit regenerative heater simulation model and analysis of the economic operation of. This paper mainly research on the heat pump system simulation and the advantages of the development status and direction of development, introduces the heater on the important significance of modern power plant simulation, and rational analysis of the economic operation mode and puts forward some effective measures for improvement. This article in view of the 600MWpower unit regenerative heater features of the dynamic modeling of a power plant, and then refer to the600MWpower unit regenerative heater rated parameters in the STAR-90simulation system is simulated, and the simulation results. Finally, based on the modeling phase is complete, a number of regenerative heater for economic operation of some of the measures and effects of some heater performance factors. The pap