卷绕式镀膜机的PLC控制系统设计（毕业学术论文设计）.docVIP

PAGE 卷绕式镀膜机的PLC控制系统设计 摘 要 高真空卷绕式镀膜机是由真空系统、卷绕系统、蒸镀系统等各部分组成的。卷绕式镀膜机在薄膜制备领域广泛应用，控制系统的设计对卷绕式镀膜机设备的稳定运行有着重要的影响。本文主要介绍了基于PLC的卷绕式镀膜机真空控制系统的硬件组成、系统原理。论述了其设计思路和方法，并重点叙述了OMRON CJ系列PLC在真空系统中的应用，对软件的设计也进行了阐述。 与以往的继电气控制系统、计算机控制系统，本文所选用的PLC具有实时性、高可靠性、系统配置灵活、丰富的I/O端口、控制系统采用模块化结构等特点。利用PLC梯形图开发软件的编辑和监视功能，经过对程序的编辑、修改实现对卷绕式镀膜机真空系统工作过程的有效控制。 关键词 卷绕式镀膜机真空系统，PLC，梯形图 ABSTRACT High vacuum winding type coating machine is the vacuum system, winding system, steamed plating system composed of each part. Winding type coating machine widely used in the film preparation areas, the design of control system for winding type coating machine equipment has an important influence stable operation. This paper mainly introduces the winding type based on PLC control system of vacuum coaters hardware composition, system theory,discusses the design idea and method, and mainly describes the OMRON PLC in vacuum CJ series of software system, the application of design also is discussed in this paper. Compared with the past the electric control system, computer control system, this paper chooses PLC has real-time, high reliability, system configuration is flexible, rich I/O port, control system USES modular structure characteristics. Using PLC ladder diagram development software editors and surveillance functions, after the editor, modification of program realization to winding type coaters vacuum system work process of effective control. Key Words: Vacuum system of winding type coating machines PLC Ladder 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc294220339 1.绪论 1 HYPERLINK \l _Toc294220340 1.1真空卷绕镀膜的基本方法 1 HYPERLINK \l _Toc294220340 1.2卷绕式镀膜机的特点 2 HYPERLINK \l _Toc294220340 1.3卷绕式镀膜机的基本配置 2 HYPERLINK \l _Toc294220341 1.4 PLC的基本组成形式 3 HYPERLINK \l _Toc294220342 1.5 PLC的内部硬件组成 4 HYPERLINK \l _Toc294220343 1.6PLC可编程序控制系统 4 HYPERLINK \l _Toc294220344 1.7其它控制系统的优劣 5 HYPERLINK \l _Toc294220345 2.卷绕式镀膜机真空