基于PLC的全自动水钻磨抛一体机---磨削机控控制器设计（毕业学术论文设计）.doc

重庆大学本科学生毕业设计（论文） 基于PLC的全自动水钻磨抛一体机---磨削机控制器的设计 学 生： 学 号： 指导教师： 助理指导教师： 专 业：机械电子工程 重庆大学机械工程学院 二O一一年六月 Graduation Design(Thesis) of Chongqing University Design of grinding machine controller of automatic crystal grinding and polishing machine based on PLC Undergraduate: Duan Ping an Supervisor: Prof. Jian Yi Assistant Supervisor : Lecturer Dang Xiangyu Lecturer Li Qianqian Major: Mechanical and Electronic Engineering College of Mechanical Engineering Chongqing University June 2011 摘 要 在水钻加工过程中，水钻的成型磨削即磨抛环节是最重要的一个加工环节，此过程也是考验水钻加工企业能否真正步入水钻生产的关键。在这个过程中，磨削机是核心器件。因此，提高磨削机控制系统的精度和效率是解决当前水钻加工过程的产品质量问题和效率问题的关键。本论文分析了国内外水钻加工现状，再以的水钻磨抛一体机为研究背景，设计了一套基于可编程控制器(PLC)的磨削机控制系统。该系统在保证产品质量的前提下，它的硬件、可靠性更强、抗干扰能力更强，很大程度上提高了水钻加工企业的生产能力。本论文阐述了该系统的选型分析和总体方案设计并给出了功能说明和梯形图，重点解决了基于PLC的控制器的自动化问题，实现了水钻的全自动化PLC，控制器，自动控制，磨削机  ABSTRACT In the crystal processing,the profile grinding including grinding and polishing is the most important part of the processing part. This process is also a key whether crystal processing enterprises can be into the production. In this process, the grinding machine is the core device. Therefore, improving accuracy and efficiency of the grinding control system is a key to solute efficiency issues and product quality issues in the crystal processing. For industrial control systems, PLC technology is one of the the most widely used control systems applied in industry. It uses ladder language which is similar to relay and is programmed more simple. For the finishing process of crystal, location detection and transferring surface are most important. In this paper，the author uses the high-performance PLC FBs-60MC of FATEK and the two-phase hybrid stepping motor 2S110Q-047F0 of Kinco to achieve the two processes. 朗读 显示对应的拉丁字符的拼音 ? 字典 In this paper，the author analyzes the status of the domestic and international crystal processing and designs a control system for grinding machines based on programmable logic controllers (PLC) accordi