《铜连铸连轧液压控制系统》毕业学术论文.docVIP

内容提要 液压系统分为液压传动系统和液压控制系统两种类型，本文的研究对象是液压系统ＹSummary This document talks about the hydraulic system design of the Close Rubber Extrusion Machine, it include the system parameter design、the calculation of the cylinder、the check of the system property and the using application of the system. This design includes casting machine process turned out of the hydraulic cylinder, the hydraulic cylinder, heat preservation furnace hydraulic cylinder and step up the design of hydraulic cylinder and hydraulic system design. In the design process of clever use lock loop, in order to accurately position and to use the Y electromagnetic valve，for it equipped with the electric connect thermometer (WSSX)、pressure relay (HED10A20)、solenoid valve、relief valve、safety valve and so on, it can far away control the oil temperature、system pressure, and it also has the priority of good structure、convenient operation、reliable property、less energy consuming and so on.Hydraulic system design principles, mainly hydraulic system design, tank design, the design and rubber pieces Fati design. In order to make the design more rational, there are relevant in the design of the stability of the performance who checked who checked. Moreover, the design for the relevant information, the use of the relevant standards, the full absorption of the predecessors of valuable experience.目录 内容提要 I Summary II 1绪论 1 1.1 课题的来源和背景 1 1.2 国内外铜连铸连轧的发展和研究 2 1.3主要的研究的内容和方法 3 2 连铸连轧液压系统设计要求及方案设计 3 2.1 系统的性能与技术要求 3 2.2 总体方案设计 5 3铜连铸机液压系统设计 6 3.1浇包倾翻部分的计算及分析 6 3.2浇包闸门部分的计算及分析 12 3.3 保温炉部分的计算及分析 16 3.4铸机张紧油缸的设计计算及分析 21 3.5 铸机部分液压元件的选择和专用件的设计 29 3.6 铸机部分液压控制阀的选择 30 3.7其他辅助液压元件的选择 31 3.8液压系统性能验算 33 4铜连轧部分计算 37 4.1工况分析 37 4.2负载分析 37 4.3拟定液压系统图 39 4.4液压缸的结构设计 39 4.5 导辊液压缸尺寸与活塞杆直径的计算 40 4.6液压缸缸体的设计 41 4.7液压缸强度校核 43 4.8液压缸实际工作压力、流量和功率的计算 43 4.9 液压元件的选择 45 4.10 非橡胶管道的选择 46 4.11 管接头的选择 47 4.12油箱的计算 47 4.13压力表及其附件 48 4.14 液压缸主要零件的结构、材料 48 4.15液压系统的性能验算 48 总结 52 参考文献 53 致 谢 54 1绪论 1.1 课题的来源和背景 中国铜加工工业在国民稳定、