毕业论文设计《--齿轮齿条转向器设计》.docVIP

PAGE l 摘要 本次设计设计一款用于轻型汽车的转向器。论文首先对转向系的作用，基本构成、要求和转向系统的总体性能进行了分析，同时对转向系的空间位置及结构特点进行分析，确定了转向梯形的型式，简单的概述了转向传动机构。确定了转向器的结构和布置形式，分析了转向器的啮合传动的特点和传动效率。根据汽车工程参考某款轻型汽车的转向器的参数，对转向器进行设计，并对齿轮齿条的齿面接触强度和齿根弯曲强度进行校核，同时利用AUTOCAD软件绘制装配图和零件图。 关键词：汽车 转向系统 转向器 齿轮齿条式 Abstract The vergence implement design is used for light automobile originally time. Effect that the thesis is first to vergence, the population function basically, composing , demanding system has carried out analysis. The characteristic has carried out analysis on space location and structure changing to a department at the same time , simple summary changing to transmission-mechanism. Have ascertained the structure changing to an implement and have arranged a form, have analysed the characteristic and drive efficiency changing to the implement falling-in drive. And the project consults some light automobile of money vergence implement parameters according to the automobile , design that to changing to an implement be in progress, the flank of a tooth to gear wheel rack contacts the intensity and the curved intensity of dedendum carrying out the core of school , makes use of the AUTOCAD software to draw assembling picture and part picture at the same time. Key words： Automotive Steering System Steering Gear Gear and Rack 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc287001910 摘要 PAGEREF _Toc287001910 \h I HYPERLINK \l _Toc287001911 Abstract PAGEREF _Toc287001911 \h II HYPERLINK \l _Toc287001912 1．前言 PAGEREF _Toc287001912 \h 1 HYPERLINK \l _Toc287001913 1.1转向系的发展 PAGEREF _Toc287001913 \h 1 HYPERLINK \l _Toc287001914 1.2汽车转向器国内外现状 PAGEREF _Toc287001914 \h 2 HYPERLINK \l _Toc287001915 1.3 设计的主要内容 PAGEREF _Toc287001915 \h 3 HYPERLINK \l _Toc287001916 2．转向系系统分析 PAGEREF _Toc287001916 \h 4 HYPERLINK \l _Toc287001917 2.1转向系统的设计要求 PAGEREF _Toc287001917 \h 4 HYPERLINK \l _Toc287001918 2.2 转向系统总体性能 PAGEREF _Toc287001918 \h 5 HYPERLINK \l _Toc287001919 2.3转向系的空间位置及结构特点 PAGEREF _Toc2870019