低压铸造缩孔缩松判据预测技术_侯华.pdfVIP

Vol.25 No. 10 Oct.2004 FOUNDRY TECHNOLO Y # 769 # # Technology and Equipment for Special Casting Process# 1 1 2 侯 华 , 徐 宏 , 程 军 ( 1. , 030051; 2., 100087) : 本文考虑了压力对临界固相率的影响,提出了压力下的缩孔预测判据, 及与压力温度梯度和 却速度相关的缩松预测 判据, 该判据已成功的应用于华北工学院铸造工程中心开发的Castsoft 软件的低压铸造模块 : 缩孔缩松预测;低压铸造; 数值模拟 :T 249. 2 : A : 1000-8365( 2004) 10-0769-03 The Technology of the Prediction of Shrinkage and Porosity during Low Pressure Casting Process 1 1 2 HOU Hua , XU Hong , CHEN Jun ( 1. Dept. of Material Science and Engineering, North China Institute of Technology, Taiyuan 030051,China: 2. Department of Science Technology, China North Industries roup Corporation, Beijing 100087,China) Abstract: In this paper, the influence of the pressure on the critical solid fraction was considered; the critical solid fraction method under the pressure condition was proposed to predict porosity. On theother hand, based on the darcy law, a new shrinkage prediction method related to pressure, temperaturegradient and cooling rate was put out. T he criterion had been successfully applied in the low-pressure casting module of castsoft, which had been developed by the casting centre of North China Institute of T echnology. Key words: Shrinkage and porosity prediction; Low-pressure casting; Numerical simulation , : [1] , , , , f sc= F ( P ) ( 1) , P , f sc, 10%, f sc , , , f sc , CAE , , ,,