ASME B16.49-2017 Factory-Made, Wrought Steel, Buttwelding Induction Bends for Tr英文版标准文件.pdf

ASME B16.49-2017 (Revision of ASME B16.49-2012) Factory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems A N A M E R I C A N N A T I O N A L S T A N D A R D ASME B16.49-2017 (Revision of ASME B16.49-2012) Factory-Made ,Wrought Steel ,Buttwelding Induction Bends for Transportation and Distribution Systems AN AMERICAN NATIONAL STANDARD Date of Issuance: December 29, 2017 The next edition of this Standard is scheduled for publication in 2022. ASME issues written replies to inquiries concerning interpretations of technical aspects of this Standard. Periodically certain actions ofthe ASME B16Committee may be publishedas Cases. Cases and interpretations are publishedonthe ASME Web site under the Committee Pages at / as they are issued. Errata to codes and standards may be posted on the ASME Web site under the Committee Pages to provide corrections to incorrectly publisheditems, orto correcttypographical orgrammatical errors incodes and standards. Such errata shall be used on the date posted. The Committee Pagescan befound at /.There is an option availableto automatically receivean e-mail notification when errata are posted to a particular code or standard.This option can befound on the appropriate Committee Page after selecting “Errata” in the “Publication Information” section. ASME is the registered trademark of The American Society of Mechanical Engineers. This code orstandardwas developed under procedures accreditedas meetingthe criteriafor American NationalStandards.The Standards Committeethat approvedthe codeorstandardwas balancedto assurethat individualsfromcompetentandconcerned interests havehadan opportunity to participate.The proposed cod